Please contact sales@accusentry.com for information about obtaining the latest build or purchasing the latest version.

Latest Builds (Click on the version number for revision history):

8.0.0 Alpha Build 2:
– Add: Reset Camera calculator function.
– Fix: Changing operator interface button from displaying chart value to chart label crashes Sentry 9000.
– Fix: Button on Free Style operator interface panel disappear.
– Enhancement: Multi-level place holder operator interface.

8.0.0 Alpha Build 3:
– Fix: Misspelling in Image Enhance dialog.
– Fix: Exposure Delay is shown.
– Fix: Flip Captured Image option is not shown.
– Enhancement: Hide non-place holder panels while in place holder mode.
– Fix: Out of range valid intensity.
– Fix: Buttons undeleting themselves.
– Fix: OPC server settings are not saved.
– Fix: Editing data item with invalid camera crashes Sentry 9000.
– Fix: Deleting operator interface panel crashes Sentry 9000.
– Fix: Cancelling Edit All Panels crashes Sentry 9000.
– Enhancement: OPC Client local data in WindowsXP SP3 is not refreshed.

8.0.0 Alpha Build 4:
– Enhancement: Remote Tool Transfer sending timeout.

8.0.0 Alpha Build 5:
– Fix: Opening an application with defect map tool will fail.
– Fix: Adding Defect Map Tool crashed the systems.

8.0.0 Alpha Build 6:
– Add: OPC Client Activity.
– Fix: TCP/IP crashes Sentry 9000 on multi-processors system.

8.0.0 Alpha Build 7:
– Add: Independent IO Delay Setting for Individual Virtual Camera.
– Fix: Calculator Divide function, division by zero result.

8.0.0 Alpha Build 8:
– Fix: Rename I/O Delay to Number of Output Shift Register.
– Fix: OPC Client Delete Item crashes Sentry 9000.

8.0.0 Alpha Build 9:
– Fix: Report Generator call Subroutine on shift change does not work.
– Fix: Fix crashing during Sentry 9000 reboot.
– Fix: OPC Client Write to Device with Result Window and moving OPC Client Activity cause Sentry 9000 to stop responding.

8.0.0 Alpha Build 10:
– Add: Calculator ‘Difference’ function.
– Enhnacement: Help About Sentry 9000… halts inspection.
– Mod: Report Generator generating production token: skip first 2 from skip 1.
downtime token: no skipping from skip 1.
– Fix: Report generator generates token on closeout.
– Enhancement: Defect Map enhancements.
– Enhancement: License check.

8.0.0 Alpha Build 11:
– Fix: Circular Warp destination camera activities retained.
– Fix: Circular Warp for color camera.
– Fix: Circular Warp destination dimension less than needed.
– Add: OPC Client Server Last Update Time.
– Add: Calculator Time Difference function.
– Fix: Tool search for circular warp tool is missing.
– Fix: Circular warp tool dialog title is circular wrap.
– Fix: Circular Edge Linearization tool.
– Enhancement: OPC Client Local Data update.
– Fix: Use Image file when actual SVC device is present.

8.0.0 Build 12:
– Enhancement: OPC Client Local Data Update Rate.
– Enhancement: Camera Link com port setting.

8.0.0 Build 13:
– Enahncement: Defect Map Catalog problems.
– Fix: Reference intensities of image capture with auto exposure.
– Fix: Area inside Area Table with reference position does not update.
– Enhancement: The image list length is limited to 10 images.

8.0.0 Build 14:
– Fix: Contour Learn with result window open will crash the system
– Fix: Camera Strobe Position is always shown as None.
– Enhancement: Operator Interface calculator functions slow down inspection.
– Fix: Contour Learn with contour smoothness level 0 crashed the system.
– Add: Image Re-size tool.
– Fix: Rotate Image tool crashes Sentry 9000.
– Fix: Editing calculator cause Sentry 9000 to hang.
– Add: Enable/Disable Auto-save.
– Enhancement: Auto-save indication.
– Enhancement: Choosing Use Saved Images should automatically display the Use Image Toolbox.
– Fix: Copy and paste inspection data table.
– Enhancement: Changing list results of clustering to criteria results.
– Fix: Camera exposure delay is not saved properly.
– Fix: Show Defect Map button does not bring up the defect map on the operator interface.
– Fix: Display Button of Camera Image does not work on generic camera.
– Fix: SVS Camera Strobe position show as None.
– Fix: Cannot set an output bit.
– Fix: 1 tap line scan camera.
– Enhancement: Sync Triggered indication.
– Fix: Error creating a library with data folder inside library folder.

8.0.0 Build 15:
– Add: Rotation options in the Contour Matching Tool.
– Add: Circular Arc Inspection Area.
– Add: Button function to OpInterface for “View OPC Client Activity”.
– Fix: Report Generator not able to extract string name from Data Table.
– Add: Pareto Chart needs ability to display limited number of data.
– Fix: Read Field from Text File always return blanks.
– Add: Circular Arc Region Inspection Area.
– Add: Service task called at the completion of camera device triggered task.
– Add: Access to graph fail and warning limits.
– Add: Repeating discrete defect map detection.

8.0.0 Build 16:
– Fix: Discrete Defect Map.

8.0.0 Build 17:
– Enhancement: Relative Calibration Reference.
– Add: Asynchronous Receive through RSLinx.
– Fix: Add or Edit Operator Dialog allows user to see others’ passwords.
– Fix: Operator list without an operator with level 0 password is allowed.
– Fix: Entering Engineering Interface with invalid password level.
– Fix: Reading Discrete Defect Map tool from inspection library crashes Sentry 9000.
– Fix: Spurious Edge Filter default values.
– Enhancement: Operator button functions that assign value needs password option.
– Enhancement: Need ability to login and logout in the operator interface.
– Enhancement: Reject List Issues.
– Fix: Zoom panel (image place holder panel) issues.
– Fix: Discrete Defect Map Left Label and Legend.

8.0.0 Build 18:
– Fix: No Inspection Flow toolbox.
– Fix: Distance measurement from/to inspection area.
– Fix: No Warning Message for Invalid Level Number in OI Button.
– Fix: Change Password in OI Need to Clear the Second Time.
– Fix: Multiple Change Password Box Hung.
– Fix: Going offline in system with frame triggered Camera Link camera takes long time.
– Enhancement: Built-in default button bitmap.
– Fix: Cannot specify list of values for Assign Tool Data button.

8.0.0 Build 19:
– Add: Goto Operator Interface Panel button function.
– Add: (Elliptical) Arc Region Inspection Area.
– Add: Discrete Defect Map ability to exclude category from defective units calculation.
– Enhancement: Option to disable OPC Client Local Data Update Rate.
– Enhancement: Data Item needs to have occurrence counts.
– Enhancement: Discrete Defect Map needs to have occurrence count for each category.
– Enhancement: Token generation from Report Generator need to be simpler.
– Enhancement: Default Values for Simple Clustering.
– Enhancement: Reject List Enhancement.
– Fix: Snap-to-grid issues.
– Fix: Out of Memory Error.
– Fix: Ellipse Fit Bug.
– Fix: Add new tool while editing another tool causes crash.
– Fix: “Zoom In/Out” buttons should be grayed out while the inspection is running.
– Fix: Remote Diagnostics Problem.
– Fix: Ungrouping a composite area crashes Sentry 9000.
– Fix: Grouping areas crashes Sentry 9000.
– Fix: Inspection Area Edit dialog annoyance.
– Fix: Discrete Defect Map XLS report.
– Fix: Discrete defect map zoom functions are backward.

8.0.0. Build 20:
– Enhancement: Sentry 9000 interaction with SentryPoint.

8.0.0. Build 21:
– Fix: CR01291 Locate Extremum Edge Point tool lacking.
– Fix: CR01293 Discrete defect map doesn’t draw defects.
– Fix: CR01298 Clicking on password protected button does not execute the button function.
– Fix: CR01302 Previous operator name is retained.
– Fix: CR01303 Deleted camera name is still displayed.
– Fix: CR01305 Adding Button for “Zoom” option does not work properly.
– Enhancement: CR01292 Report Generator Database Token Location.
– Enhancement: CR01294 Ability to specify camera sequence.

8.0.0. Build 22:
– Fix: CR01311 Memory leaks.
– Fix: CR01312 Keep increasing memory usage.
– Fix: CR01314 Report Generator – While adding new Fields, the Field Header Value Remains the Same.
– Enhancement: CR01313 Simple Clustering “Ignore clusters…” default values do not make sense.
– Enhancement: CR01315 Limited Range of Adjustment for Areas and Input Dialogs.
– Enahncement: CR01316 Inspection Recorder enhancements.
– Fix: CR01317 Misspelling Draw Arc Region bubble help.
– Fix: CR01318 Need more information to be displayed on Arc area editing.
– Fix: CR01329 Button displaying remote operator panels causes panel to disappear.
– Fix: CR01330 Spatial Filter Graphics Refresh Bug.
– Enhancement: CR01331 Contour learn parameters access.
– Enhancement: CR01332 Ability to open multiple Sentry 9000 developer version at the same time.
– Add: CR01337 Assign Inspection Area Data.
– Fix: CR01338 Simple Clustering’s mask small clusters option crashes Sentry 9000.
– Fix: CR01320 Include Operator Panels does not work correctly when saving library.
– Fix: CR01321 Adjust Area dialog is grayed out.
– Fix: CR01334 No option to “Paste Below” when copying Inspection Task or Subroutine.
– Fix: CR01325 Default Display Update needs to be 300 ms.
– Fix: CR01333 Sentry 9000 crashes when clicking “X” on Tool Workspace.
– Fix: CR01343 Saving inspection with many operator interface panels is slow.
– Fix: CR01327 Display Image File Toolbox inconsistency.
– Fix: CR01341 Image File Toolbox needs bubble text.
– Fix: CR01348 Garbled text in Results window for “Annotate Defect Map” function.
– Enhancement: CR01351 Software security.
– Fix: CR01433 Graph displays random lines across button.

8.0.0. Build 23:
– Fix: CR01349 Limited Range Line-Area Bugs.
– Fix: CR01350 Limited Range Rectangle-Area crashes system.
– Fix: CR01355 Odd behavior when editing tool properties of Defect Map.
– Fix: CR01356 Add “Limit…” to the right-click menu on area workspace.
– Enhancement: CR011358 Simple Clustering parameter access.
– Fix: CR01359 Diagnostic menu Inconsistent Name.
– Fix: CR01360 Circular warp parameters need to have units.
– Enhancement: CR01361 Circular warp overlap unit is better in degree instead of pixels.
– Enhancement: CR01364 Data Item page: multiple boards will be better if displayed in multiple tabs.
– Enhancement: CR01344 Advanced Clustering Tolerance Page Annoyance.
– Fix: CR01366 Inspection Recorder destination.
– Enhancement: CR01365 Occurrence count not on Data Item Dialog.
– Fix: CR01336 Defective Image review from Image List skips.
– Enhancement: CR01370 Rotate Image tool parameters access.
– Fix: CR01371 Contour Match Tool is not reliable for small model.
– Fix: CR01372 Contour Learn Tool cannot display anchor points for diagnostic purpose.
– Fix: CR01390 Incorrect edge get graph.

8.0.0. Build 24:
– Fix: CR01415 Contour Learn tool default parameters need to be refined.
– Fix: CR01419 Contour Learn does not display contour if dialog to apply model prompted.
– Enhnacement: CR01420 Increase Camera Link max. devices to 4.
– Add: CR01422 Sentry 9000 Base and Standard version.

8.0.0 Build 25:
– Add: CR01421 Add firewire camera.
– Fix: CR01377 Contour Match Tool not updating the result window properly.
– Fix: CR01378 Contour Match Percentage reported inconsistently.
– Fix: CR01429 Cannot assign Ellipse Fit center points.
– Fix: CR01376 Contour Learn color change erases model.
– Fix: CR01405 Contour Learn tool Rebuild button not available.
– Fix: CR01414 Sentry 9000 freezes after stopping when “Stop on Fail” is enabled.
– Fix: CR01393 Inspection Recorder Default prompt button.
– Fix: CR01410 Area Limits Angle Default Value.
– Fix: CR01167 Camera type not detected.
– Fix: CR01423 Wrong image file name displayed in Camera window titlebar.
– Fix: CR01408 SVC Cameras reset when using Image Files.
– Fix: CR01430 Production token generation changes the reject id to lower case.
– Fix: CR01431 I/O settings changes are not saved.
– Fix: CR01432 I/O control tool is failing.

8.0.0 Build 26:
– Fix: CR01416 Contour Match Tool needs to have Edge Get tool included inside the tool.
– Fix: CR01374 Copy paste a Contour Learn tool will share the same area folder location
– Fix: CR01434 Undo contour learn deletion crashes Sentry 9000.
– Fix: CR01435 Deleting Contour Learn tool does not delete its result folder.
– Fix: CR01369 Diagnostic Menu lacks Result Window Search.
– Fix: CR01436 Rename AVT Stingray F-504B.
– Fix: CR01289 “Pause Display” does not seem to work for Virtual Camera inspections.

8.0.0 Build 27:
– Fix: CR00875 Need ability to set font size to display on OI buttons.
– Fix: CR01437 Report generator tool does not use AM/PM indication to calculate shift.
– Add: CR01440 New camera type 656N.
– Enhancement: CR01441 Post/Reset Item enhancement.
– Add: CR01442 Text background.

8.0.0 Build 28:
– Fix: CR01443 File will not open.

8.0.0 Build 29:
– Fix: CR01444 Report Generator call Subroutine on shift change does not work.
– Add: CR01445 Search function for Area workspace.

8.0.0 Build 30:
– Add: CR01446 Search function for Data workspace.
– Enhancement: CR01459 Inspection Recorder deletes inspeciton sequence without warning.
– Add: CR01461 Ability to highlight area and/or data.
– Fix: CR01462 Edge get with intensity exclusion does not behave correctly.
– Fix: CR01453 “Demo License Expired” message should read “Developer”.
– Enhancement: CR01460 New inspection area should appear in center of view, not cam window.
– Fix: CR01450 Inspection Area stays highlighted.
– Enhancement: CR01463 Save image file on separate thread.
– Fix: CR01464 Converting subroutine to library crashes Sentry 9000.
– Fix: CR01465 Different behavior on tool display activities.

8.0.0 Build 31:
– Fix: CR01467 Contour match doesn’t perform edge get function.
– Fix: CR01468 Adding PLC for Modbus TCP Client crashes Sentry 9000.
– Enhancement: CR01466 Menu tool bar.
– Add: CR01472 Image file random sequence.

8.0.0 Build 32:
– Add: CR01474 Editable text operator interface button.
– Fix: CR01479 Blank ASI2000 camera Image Type selection.
– Fix: CR01480 Blank ASI2000 camera Signal Gain selection.
– Fix: CR01256 Distance measurement from/to inspection area.
– Add: CR01475 Enable/disable individual calculator tool command.
– Fix: CR01477 Calculator flow control does not behave properly for NOT function.
– Add: CR01481 Blinking operator interface button.
– Fix: CR01482 Remote Inspection Interface.
– Add: CR01483 Login Operator Interface calculator function.
– Add: CR01484 Calculator functions for manipulating blinking button.
– Fix: CR01486 Customized Font not copied with button.
– Fix: CR01489 Camera Link fail to open Com Port.
– Add: CR01490 Option to call subroutine before entering another operator interface panel.
– Fix: CR01491 Contour Learn and Contour Match do not keep changes in Inspection Area.
– Enhancement: CR01496 Location for saved defect map.
– Enhancement: CR01497 Defect count by lane.

8.0.0 Build 33:
– Fix CR01499 Sentry 9000 WinXP version 8.0 with developer license.

7.5.0 Build 2 SVM:
– Fix Cannot open Distance Measurement dialog.
– Enhance Data table rows and colums max increased to 2048.
– Fix Simple clustering with merging requires large memory.
– Enhance Load Image File rotate option. Document version increased to 707.
– Fix Copy Chart will not keep the reference data into the copied chart.
– Fix Add row and column in Data and Area Table needs to move to the next row.
– Fix Surface Normalization is broken when using new area style.
– Fix Default values for some of calculator functions.
– Enhance File New dialog.
– Add Calculator save screen capture function.
– Fix Defect Map stops inspection.
– Fix New virtual keyboard entry for password does not recognize the virtual “enter”.
– Add Chart Histogram results need to be accessible.
– Enhance Chart Histogram maximum groups need to be increased (32->48).
– Enhance Report generator fields limit needs to be increased (255->320).
– Fix Calculator does not duplicate color images to generic or other color image window.
– Fix Color image file buffering crashes Sentry 9000.
– Fix Defect map color image tool tip doesn’t display correctly.
– Fix Discrete defect map doesn’t save PNG format.
– Fix Operator Interface button will not display data table value.
– Fix Color camera rgb gain is defined only by device.

7.5.0 Build 3 SVM:
– Fix Generic camera as the first camera crashes Sentry 9000.
– Fix Operator interface button password protection is not retained.
– Fix Edge get graph does not show the threshold line.
– Add Ability to setup OPC Client items offline.
– Fix Color match tool result is incorrect.
– Add Generic color camera.
– Fix Table template column header spelling is incorrect.
– Add Color camera image capture parameters.
– Add Duplicate image mask calculator function.
– Fix Get status of OPC Server crashed the system.
– Fix Calculator referencing OPC Client Local Data is not saved.
– Enhancement: OPC Client on separate thread.
– Fix Create Area based on clusters crashed Sentry 9000.
– Add Exposure delay for SVS camera.
– Fix Defect map catalog crashes Sentry 9000.
– Fix Numerical error on the defect map report after splicing.
– Fix Cutting a portion of defect map crashes Sentry 9000.
– Fix Adv clustering merge error.
– Fix Chart tool crashes Sentry 9000.
– Fix Advanced Clustering criteria text boxes are not long enough.
– Fix Math Tool If statement does not execute correctly.
– Fix Editing Inspection Interface Remote Control button crashes Sentry 9000.
– Fix Collapse all function does not collapse folder inside another folder.
– Fix Report Generator Field labels moves out of view.
– Fix Report Generator Tool “Apply” Button does not create Token/RPT file.
– Fix System Setup/Add New camera default type.
– Fix Operator Interface button flickers.

7.5.0 Build 4 SVM:
– Enhancement: Display image on a button including inspection activities.
– Enhancement: Disallow another image capture by triggering camera.
– Fix Enable OPC Client crash the system.
– Fix System Crashed when Close Application after Changes in Data.
– Add subpixelization term to the enhance edge smoothness option.
– Rename Random Noise Filter to Image Morphology.
– Histogram old style area does not have apply button.
– Fix Contour Learn with contour smoothness level 0 crashed the system.

7.5.0 Build 5 SVM:
– Add Ability to trigger through OPC.
– Fix: Cut/paste images from cam0 to cam1 consistently crashes the S9K.
– Enhancement: Conditional dual processor prompt needed.
– Fix: Tool Summary does not save the list when application is closed.
– Fix: Verify Library function will change calculator reference to operator panel.
– Add: Display histogram of intensity distribution.
– Enhancement: Data Table memory allocation.
– Fix: Calculator OPC Client operation to a disconnected server crashes Sentry 9000.
– Fix: Image Morphology (Random noise filter) using old area.
– Fix: ASI 2000 Camera Trigger Position is always shown as None.
– Fix: Connecting to invalid OPC Server locks up Sentry 9000.
– Fix: Free running Camera Link with 0 exposure time crashes Sentry 9000.

7.5.0 Build 6 SVM:
– Fix: SVS camera offset incorrect behavior.
– Fix: Subroutine string parameter missing last character.
– Fix: Increase the number of operator buttons to 96.
– Add: Defec Map Web Wander.
– Fix: Tool bar does not show correctly in 800 x 600 screen resolution.
– Add: Report Header needs ability to reference.
– Fix: Report generator creates double entries when it is set to time based.

7.5.0 Build 7 SVM:
– Fix: Report generator removed reset source option on the advanced page.
– Enhancement: Report generator needs to show directory of separate shift reports.
– Fix: OPC Client Retrieve from Device doesn’t update local data.

7.5.0 Build 8 SVM:
– Fix: Ref. Camera Marker Position became zero in Inspection Task tool.
– Fix: Sentry SVM V7.5, saving after importing Library Bug.
– Fix: Saving clustering tool with invalid old style area locator will corrupt s9k file.
– Fix: Pareto chart auto add data items.
– Fix: Inspection Task activated by OPC Client Text Message.

7.5.0 Build 9 SVM:
– Fix: Color Match tool identify wrong color.
– Fix: Edit System Setup an Application with OPC offline will crash the system.
– Fix: Edge Get Graph is not correct when using noise and fuzziness reduction.
– Fix: Saving image as PNG is slow.
– Fix: Display Inspection Area Tables.
– Fix: OPC Client value of number has space at the end.

7.5.0 Build 10 SVM:
– Fix: Duplicate image mask to/from invalid camera crashes Sentry 9000.
– Enhancement: Post Item tool ability to set output bits on multiple I/O boards.
– Fix: Loop count doesn’t start from starting value (first index).
– Fix: Remote Tool Transfer cannot send color image.
– Fix: Distance Measurement reference which data.
– Add: Operator message length.
– Fix: Rotate Color Image doesn’t transfer Hue and Saturation values.
– Enhancement: Color Match tool enhancements.
– Fix: Color Match tool Target and Tolerance values retrieval return 0.
– Fix: Blank OPC Client Server ID crashes Sentry 9000.
– Enhancement: Reduce waiting time for operator interface related calculator functions.
– Add: Button function to open I/O Activity.
– Fix: OPC Client Add Item button disabled.
– Fix: OPC Client WTclient.dll demo version.
– Fix: Retrieve Inspection Data does not work.
– Fix: Export Inspection Data Table doesn’t work.
– Fix: Simple clustering with multiple areas and without merging doesn’t work.
– Enhancement: Select all image file names.
– Fix: Duplicate Image Mask between color and grey scale camera.
– Fix: Pause image display on fail still refreshing inspection activities.
– Fix: Opening S9K application w/ Use Image File on Crashes.
– Enhancement: Ignore masked region in histogram tool.
– Fix: Camera Link advanced parameters.
– Fix: Sync count displayed incorrect.
– Enhancement: Image file dialog default option.
– Fix: Sentry 9000 crashes when converting subroutine to library.
– Enhancement: Image morphology tool is slow.
– Fix: Enable/Disable Interface Panel button function.
– Add: Saving and reviewing image.

7.5.0 Build 11 SVM:
– Fix: Apply button does not work on a disabled calculator.
– Fix: Data Item created Post Item but no name.
– Add: Place Holder buttons.
– Add: Circular Warp tool.

7.5.0 Build 12 SVM:
– Add: Reset Camera calculator function.
– Enhancement: Access to Circular Warp tool parameters.
– Fix: Changing operator interface button from displaying chart value to chart label crashes Sentry 9000.
– Fix: Button on Free Style operator interface panel disappear.
– Enhancement: Multi-level place holder operator interface.
– Fix: Misspelling in Image Enhance dialog.
– Fix: Exposure Delay is shown.
– Fix: Flip Captured Image option is not shown.
– Enhancement: Hide non-place holder panels while in place holder mode.
– Fix: Out of range valid intensity.
– Fix: Buttons undeleting themselves.
– Fix: OPC server settings are not saved.
– Fix: Editing data item with invalid camera crashes Sentry 9000.
– Fix: Deleting operator interface panel crashes Sentry 9000.
– Fix: Cancelling Edit All Panels crashes Sentry 9000.
– Enhancement: OPC Client local data in WindowsXP SP3 is not refreshed.
– Enhancement: Remote Tool Transfer sending timeout.
– Add: OPC Client Activity.

7.5.0 Build 13 SVM:
– Add: Independentl IO Delay Setting for Individual Virtual Camera.

7.5.0 Build 14 SVM:
– Fix: Calculator Divide function, division by zero result.
– Fix: Rename I/O Delay to Number of Output Shift Register.
– Fix: OPC Client Delete Item crashes Sentry 9000.
– Fix: Report Generator call Subroutine on shift change does not work.
– Fix: Fix crashing during Sentry 9000 reboot.
– Fix: OPC Client Write to Device with Result Window and moving OPC Client Activity cause Sentry 9000 to stop responding.
– Add: Calculator ‘Difference’ function.
– Enhnacement: Help About Sentry 9000… halts inspection.
– Mod: Report Generator generating production token: skip first 2 from skip 1.
downtime token: no skipping from skip 1.
– Fix: Report generator generates token on closeout.
– Enhancement: Defect Map enhancements.
– Fix: Circular Warp destination camera activities retained.
– Fix: Circular Warp for color camera.
– Fix: Circular Warp destination dimension less than needed.
– Add: OPC Client Server Last Update Time.
– Add: Calculator Time Difference function.
– Fix: Tool search for circular warp tool is missing.
– Fix: Circular warp tool dialog title is circular wrap.
– Fix: Circular Edge Linearization tool.
– Enhancement: OPC Client Local Data update.
– Fix: Use Image file when actual SVC device is present.
– Enhancement: OPC Client Local Data Update Rate.
– Enhancement: Camera Link com port setting.
– Enahncement: Defect Map Catalog problems.
– Fix: Area inside Area Table with reference position does not update.
– Enhancement: The image list length is limited to 10 images.
– Fix: Camera Strobe Position is always shown as None.
– Enhancement: Operator Interface calculator functions slow down inspection.
– Fix: Contour Learn with contour smoothness level 0 crashed the system.
– Add: Image Re-size tool.
– Fix: Rotate Image tool crashes Sentry 9000.
– Fix: Editing calculator cause Sentry 9000 to hang.
– Add: Enable/Disable Auto-save.
– Enhancement: Auto-save indication.
– Enhancement: Choosing Use Saved Images should automatically display the Use Image Toolbox.
– Fix: Copy and paste inspection data table.
– Enhancement: Changing list results of clustering to criteria results.
– Fix: Camera exposure delay is not saved properly.
– Fix: Show Defect Map button does not bring up the defect map on the operator interface.
– Fix: Display Button of Camera Image does not work on generic camera.
– Fix: Cannot set an output bit.
– Fix: 1 tap line scan camera.
– Enhancement: Sync Triggered indication.
– Fix: Error creating a library with data folder inside library folder.
– Add: Circular Arc Inspection Area.
– Add: Button function to OpInterface for “View OPC Client Activity”.
– Fix: Report Generator not able to extract string name from Data Table.
– Add: Pareto Chart needs ability to display limited number of data.
– Add: Circular Arc Region Inspection Area.
– Add: Service task called at the completion of camera device triggered task.
– Add: Access to graph fail and warning limits.
– Add: Repeating discrete defect map detection.
– Enhancement: Relative Calibration Reference.
– Add: Asynchronous Receive through RSLinx.
– Fix: Add or Edit Operator Dialog allows user to see others’ passwords.
– Fix: Operator list without an operator with level 0 password is allowed.
– Fix: Entering Engineering Interface with invalid password level.
– Fix: Spurious Edge Filter default values.
– Enhancement: Operator button functions that assign value needs password option.
– Enhancement: Need ability to login and logout in the operator interface.
– Enhancement: Reject List Issues.
– Fix: Zoom panel (image place holder panel) issues.
– Add: Goto Operator Interface Panel button function.
– Add: (Elliptical) Arc Region Inspection Area.
– Add: Discrete Defect Map ability to exclude category from defective units calculation.
– Enhancement: Option to disable OPC Client Local Data Update Rate.
– Enhancement: Data Item needs to have occurrence counts.
– Enhancement: Discrete Defect Map needs to have occurrence count for each category.
– Enhancement: Token generation from Report Generator need to be simpler.
– Enhancement: Default Values for Simple Clustering.
– Enhancement: Reject List Enhancement.
– Fix: Snap-to-grid issues.
– Fix: Out of Memory Error.
– Fix: Ellipse Fit Bug.
– Fix: Add new tool while editing another tool causes crash.
– Fix: “Zoom In/Out” buttons should be grayed out while the inspection is running.
– Fix: Remote Diagnostics Problem.
– Fix: Ungrouping a composite area crashes Sentry 9000.
– Fix: Grouping areas crashes Sentry 9000.
– Fix: Inspection Area Edit dialog annoyance.
– Fix: Discrete Defect Map XLS report.
– Fix: Discrete defect map zoom functions are backward.
– Enhancement: Sentry 9000 interaction with SentryPoint.

7.5.0 Build 15 SVM:
– Fix: CR01291 Locate Extremum Edge Point tool lacking.
– Fix: CR01293 Discrete defect map doesn’t draw defects.
– Fix: CR01298 Clicking on password protected button does not execute the button function.
– Fix: CR01302 Previous operator name is retained.
– Fix: CR01303 Deleted camera name is still displayed.
– Fix: CR01305 Adding Button for “Zoom” option does not work properly.
– Fix: CR01311 Memory leaks.
– Fix: CR01312 Keep increasing memory usage.
– Fix: CR01314 Report Generator – While adding new Fields, the Field Header Value Remains the Same.
– Enhancement: CR01292 Report Generator Database Token Location.
– Enhancement: CR01294 Ability to specify camera sequence.
– Enhancement: CR01313 Simple Clustering “Ignore clusters…” default values do not make sense.
– Enhancement: CR01315 Limited Range of Adjustment for Areas and Input Dialogs.
– Enahncement: CR01316 Inspection Recorder enhancements.
– Fix: CR01317 Misspelling Draw Arc Region bubble help.
– Fix: CR01318 Need more information to be displayed on Arc area editing.
– Fix: CR01329 Button displaying remote operator panels causes panel to disappear.
– Fix: CR01330 Spatial Filter Graphics Refresh Bug.
– Enhancement: CR01332 Ability to open multiple Sentry 9000 developer version at the same time.
– Fix: CR01338 Simple Clustering’s mask small clusters option crashes Sentry 9000.
– Fix: CR01320 Include Operator Panels does not work correctly when saving library.
– Fix: CR01321 Adjust Area dialog is grayed out.
– Fix: CR01334 No option to “Paste Below” when copying Inspection Task or Subroutine.
– Fix: CR01325 Default Display Update needs to be 300 ms.
– Fix: CR01333 Sentry 9000 crashes when clicking “X” on Tool Workspace.
– Fix: CR01343 Saving inspection with many operator interface panels is slow.
– Fix: CR01327 Display Image File Toolbox inconsistency.
– Fix: CR01341 Image File Toolbox needs bubble text.
– Fix: CR01348 Garbled text in Results window for “Annotate Defect Map” function.
– Fix: CR01349 Limited Range Line-Area Bugs.
– Fix: CR01350 Limited Range Rectangle-Area crashes system.
– Fix: CR01355 Odd behavior when editing tool properties of Defect Map.
– Fix: CR01356 Add “Limit…” to the right-click menu on area workspace.
– Enhancement: CR011358 Simple Clustering parameter access.
– Fix: CR01359 Diagnostic menu Inconsistent Name.
– Fix: CR01360 Circular warp parameters need to have units.
– Enhancement: CR01361 Circular warp overlap unit is better in degree instead of pixels.
– Enhancement: CR01364 Data Item page: multiple boards will be better if displayed in multiple tabs.
– Enhancement: CR01344 Advanced Clustering Tolerance Page Annoyance.
– Fix: CR01366 Inspection Recorder destination.
– Enhancement: CR01365 Occurrence count not on Data Item Dialog.
– Fix: CR01336 Defective Image review from Image List skips.
– Enhancement: CR01370 Rotate Image tool parameters access.
– Fix: CR01390 Incorrect edge get graph.
– Enhnacement: CR01420 Increase Camera Link max. devices to 4.
– Fix: CR01429 Cannot assign Ellipse Fit center points.
– Fix: CR01414 Sentry 9000 freezes after stopping when “Stop on Fail” is enabled.
– Fix: CR01393 Inspection Recorder Default prompt button.
– Fix: CR01410 Area Limits Angle Default Value.
– Fix: CR01167 Camera type not detected.
– Fix: CR01423 Wrong image file name displayed in Camera window titlebar.
– Fix: CR01408 SVC Cameras reset when using Image Files.
– Fix: CR01430 Production token generation changes the reject id to lower case.
– Fix: CR01431 I/O settings changes are not saved.
– Fix: CR01432 I/O control tool is failing.
– Fix: CR01369 Diagnostic Menu lacks Result Window Search.
– Fix: CR01289 “Pause Display” does not seem to work for Virtual Camera inspections.
– Fix: CR01433 Graph displays random lines across button.

7.5.0 Build 16 SVM:
– Enhnacement: CR01420 Increase Camera Link max. devices to 4.
– Fix: CR01429 Cannot assign Ellipse Fit center points.
– Fix: CR01414 Sentry 9000 freezes after stopping when “Stop on Fail” is enabled.
– Fix: CR00907 Image Capture Out Of Boundary Condition.
– Fix: CR01393 Inspection Recorder Default prompt button.
– Fix: CR01410 Area Limits Angle Default Value.
– Fix: CR01167 Camera type not detected.
– Fix: CR01423 Wrong image file name displayed in Camera window titlebar.
– Fix: CR01408 SVC Cameras reset when using Image Files.
– Fix: CR01430 Production token generation changes the reject id to lower case.
– Fix: CR01431 I/O settings changes are not saved.
– Fix: CR01432 I/O control tool is failing.
– Fix: CR01369 Diagnostic Menu lacks Result Window Search.
– Fix: CR01289 “Pause Display” does not seem to work for Virtual Camera inspections.
– Fix: CR01437 Report generator tool does not use AM/PM indication to calculate shift.
– Enhancement: CR01441 Post/Reset Item enhancement.
– Fix: CR01444 Report Generator call Subroutine on shift change does not work.
– Add: CR01445 Search function for Area workspace.
– Add: CR01446 Search function for Data workspace.
– Enhancement: CR01459 Inspection Recorder deletes inspeciton sequence without warning.
– Add: CR01461 Ability to highlight area and/or data.
– Fix: CR01462 Edge get with intensity exclusion does not behave correctly.
– Fix: CR01453 “Demo License Expired” message should read “Developer”.
– Enhancement: CR01460 New inspection area should appear in center of view, not cam window.
– Fix: CR01450 Inspection Area stays highlighted.
– Fix: CR01464 Converting subroutine to library crashes Sentry 9000.
– Fix: CR01477 Calculator flow control does not behave properly for NOT function.
– Enhancement: CR01497 Defect count by lane.

7.0.0 Beta Build 11:
– Add Reset RS232 Com Port calculator function.

7.0.0 Beta Build 12:
– Fix flip captured image option in Advanced camera dialog for generic camera.
– Fix OPC Client Write to device calculator function.

7.0.0 Beta Build 13:
– Add Reset Report Generator calculator function.

7.0.0 Beta Build 14:
– Add Transfer Hue, Transfer Saturation, and Transfer Intensity options in Image Capture tool for color camera.
– Fix color image whose intensity is modified by a tool to reflect the new intensity.
– Fix Reset Report Generator function in calculator tool if report generator is generating database token.
– Modify behavior of report generator difference to be increment.
– Fix crashing problem when expanding an area group by pressing +.

7.0.0 Beta Build 15:
– Add parameters for Transfer Hue in Image Capture tool for color camera.
– Fix Camera Link for not being closed if creating new inspection file.
– Add Camera Link Grab parameter logging.(Sentry9k.ini [CAMERA] LogCamera=1)
– Fix Frame Triggered Camera Link to be able free run.
– Fix Chart tool display.
– Fix Reset Graph Data to reset the results too.
– Report Generator will not generate database token after switching product.

7.0.0 Beta Build 16:
– Fix Edge Get using contrast or intensity differnce type will crash.
– Fix File Close (unmodified), followed by File New crashing.
– Fix Operator interface button display adjust are toolbox referencing incorrect area that is listed after a composite area.

7.0.0 Beta Build 17:
– Add ability to divide defect map into lanes and display a specific lane.
– Fix demo version Edit System inability to change IO type.

7.0.0 Beta Build 18:
– Fix button function “Display Operator Message List”
– Fix convert subroutine to library crashing.
– Add saving csv option for report generator tool.
– Fix Report Generator generating database token locking up inspection.
– Add User Defined type for Prompt Operator Message calculator function.

7.0.0 Beta Build 19:
– Add User Defined type for Asynchronous Prompt Operator Message calculator function.
– Add option for defect be expanded to the width of each lane it is present in.

7.0.0 Beta Build 20:
– Add auto add inspection data group folder members into report generator and graph.
– Increase defect map max lanes from 16 to 64.
– Fix Spurious edge filter memory leaks.
– Display Defect map lane label in the middle of the lane.
– Fix expanded defect size to lane width/

7.0.0 Beta Build 21:
– Fix turn operator interface with graph button on and off crashing.
– Fix File Save As application with graph button.
– Fix Inspection Task activated by Async Prompt OK/CANCEL misbehavior.
– Add Inspection Task activated by User Defined Async Prompt.
– Fix Limited Viewing Window.

7.0.0 Beta Build 22:
_ Fix add OPC Client item of type date crashes Sentry 9000
– Fix add OPC Client item memory leak.
– Add option to post process defect map report.
– Add ‘advanced’ clustering tool type to classify simple clustering result.

7.0.0 Beta Build 23:
– Fix OPC temporary key if used with system’s demo/temporary key.
– OPC Client usage requires OPC license.
– Report Generator to generate database token requires DAS license.
– Add calculator function “Is Application Launched?”
– Inspection stops in operator interface after mouse moved above a panel if tcp/ip is enabled.
– Add “Number of Camera Buffers” parameter for Camera Link.
– Fix retrieving reference tool data value for float result (index>=512) or integer parameter (index>=144).
– Fix Adv clustering, select tolerance for “Any Inspection Criteria”. If it fails then the clusters found do not have red bounding boxes or highlighting

7.0.0 Beta Build 24:
– Enhance fail status in result window
– Fix “Open Adjust Area Toolbox” button opening wrong area.
– Fix Calculator dialog with an operation referencing operator interface button with blank name.

7.0.0 Beta Build 25:
– Add permanent demo key
– Add significant digit to display for button displaying Op Msg List.
– Fix advanced clustering contrast criteria.
– Add calculator function Get Button Name

7.0.0 Beta Build 26:
– Add ability to retrieve data table, row, and column label name.
– Fix data table significant digit display.
– Fix Muliple Duplication of Mulltiple Referenced Areas
– Fix operator interface button “Enable/Disable Display Inspection Results”.
– Fix operator interface button “Shut Down Computer”
– Fix system set up password entry needs confirmation entry
– Fix simple clustering with cluster type dak and bright outside relative to background intensity using reference intensity.
– Fix simple clustering with cluster type dak and bright outside relative to background intensity found cluster when it should not.
– Fix Exit Interface button changed Status: Online button.
– Add paste special: paste without area.
– Increase math tool max variables from 16 to 256.
– Fix math tool exceptions: division by 0, modulus of 0.
– Fix defect map tool does not create rpt and xls when is there is no defect.
– Fix daisy chaining of advanced clustering crashing.
– Fix encoder frequency display.

7.0.0 Beta Build 27:
– Fix crashing caused by deleting operator interface panel that contains button displaying reference tool data.
– Add defect map report entries options.
– Fix Operator interface button with multiple states displaying wrong bitmap.
– Fix overrun defect map report numbering error.

7.0.0 Beta Build 28:
– Fix deleting defect map tool leaves orphan defect map window.
– Enhance loading image file to memory by specifying ImageFileBuffers.
– Fix crashing caused by changing Binning Mode through Image File Toolbox.
– Remove unused menu items.
– Enhance report generator tool to save to same file for 1 month, 1 year, or forever.
– Fix crashing if specifying report header in report generator tool, or using ‘%’ in the field header.
– Enhance defect map results access.
– Fix Defect Map tool Save As to non-existent folder failure.
– Add auto reconnect for OPC Client to OPC Server.
– Add Calculator function Is OPC Client Connected to OPC Server and Connect to OPC Server.
– Enhance record inspection to specify which inspection task to be recorded.
– Increase operator interface panels max from 64 to 96.
– Fix report generator with a lot of fields editing speed.

7.0.0 Beta Build 29:
– Fix Math tool If statement does not execute correctly
– Fix interrupt divide should be 1 (one) if window trigger position bit is of type input.
– Fix Save As inspection with a lot of operator interface panels to different folder is slow.
– Add a new function to delete all unused inspection areas.
– Add OI Button to enter operator interface need ability to create the new panel.
– Fix creating post item with new data defaulted to the post item’s name.
– Add a right-click function to colapse all tools, areas, or data
– Add button function to select from list of values.
– Increase OPC Client params max from 128 to 256.

7.0.0 Beta Build 30:
– Fix user defined asynchronous prompt task does not save button value.
– Fix Demo version shouldn’t assume ‘no’ in recovery, but wait for user.
– Add Ability to check if a tool is enabled/disabled.
– Fix importing library cause operator interface button lose reference to area and data.
– Add Math variable description
– Fix Color Match tolerances listed as targets.
– Fix Report Generator field always report 0

7.0.0 Beta Build 31:
– Fix Prompt Operator for Tool Data Input Value assigning string.
– Fix Copying string data value while specifying list of values crashes Sentry 9000.
– Fix Misspell worst with worse.
– Fix Default selection for inspection recorder.
– Fix References for category in discrete defect map are not saved.
– Fix No indication which tools are valid to be referenced by discrete defect map.
– Fix Discrete defect map report does not give correct data.
– Add Paste special using the same area.
– Add Disconnecting OPC Client from a Server will remove all items from the list.
– Fix Operator panel shown in engineering interface.
– Add Display camera image on operator interface button.
– Image pixel manipulation calculator function.
– Increase number of user timer from 4 to 16.
– Fix OPC Client auto reconnect message annoyance.
– Fix Image window displayed at wrong location
– Fix Defect Map reported incorrect percent good and percent defect.
– Fix Cut Field and Delete Field in report generator dialog disabled.
– Add Defect Map Report Total Defect Count.

7.0.0 Beta Build 32:
– Add Truncate Right and Retain Right calculator functions.
– Add ability to highlight tool.
– Fix Image Capture Out Of Bound Condition.
– Add Multi-monitors capability.
– Add Open toolbox from an operator interface button.
– Fix Defect map print out doesn’t match display.

7.0.0 Beta Build 33:
– Add Import/export data table from/to csv file.
– Fix Defect map catalog crashes Sentry 9000.
– Fix Disabled Image Capture tool will hung the system.
– Add System setup to have name option for copying inspection tools.
– Fix Advanced clustering contrast bin does not retain its values.
– Fix Closing debug window will generate error message when stopping inspection.
– Enhance Inspection Flow Toolbox change Freeze button to a check box.
– Add New tool: Pattern tool and Pattern matching tool.
– Fix Tool Pass? does not consider if referenced by flow control.
– Fix Going to engineering interface without entering password.
– Enhance Resize adjust tool data toolbox in operator interface.
– Fix “Apply” on a folder needs to execute all tools inside the folder.
– Add Option for not to display OPC Client reconnect message.

7.0.0 Beta Build 34:
– Fix Closing modified math tool dialog has no confirmation.
– Fix Normalization tool Locator Width/Height is inactive.
– Fix Normalization tool still using old area style.
– Add Ability to specify camera image type.
– Fix Button function “Display Reference Tool cumulative Average”.
– Fix crashing problem with area or data table using table template with 3 rows and 3 columns.
– Include virtual keyboard into the password dialog to increase data input reliability.
– Add close button and more space to inspection recorder dialog.
– Fix Defect map report misalignment.
– Fix Camera link calibrate page uses incorrect camera.
– Add Keyboard for saving inspection records.

7.0.0 Beta Build 35:
– Add Inspection areas need to have annotation.
– Fix Loading png image crashes Sentry 9000.
– Add Invert Image Mask action for Image Mask tool.
– Add Restore original image upon cancel.
– Add Noise reduction options increased from 10 to 64.
– Add Inspection recorder needs short description on the top of the dialog.
– Add Spatial filter tool needs a predefined sets of filters.
– Fix Undo function does not work on calculator.
– Add RSLinx Communication Active?
– Show Limited Viewing Window parameters always.
– Add Number of processors check.
– Add Histogram of intensity for simple clustering and clustering tools.
– Fix Execute Inspection with a specified starting Tool button locks up camera.

7.0.0 Beta Build 36:
– Fix OPC Client with auto-reconnect crash the system when closing the application.
– Add Discrete defect map is not listed in the View menu.
– Fix Inspection Area does not turn off after adjusement.
– Fix Cursor rotation of an area is ANNOYING AND IMPOSSIBLE.
– Fix Sentry9k does not remember last product run.
– Fix Product Select Button with default setting.
– Fix Adding New Library gives Error message.
– Fix Sentry 9000 crash after importing data to Inspection Data Table then Cancel.
– Fix Temporary key.

7.0.0 Beta Build 37:
– Add Calculator function Browse File.
– Fix Line check tool, filter page, terminology “furthest” should be “farthest”.
– Fix I/O tool does not specify what modules are group A, B, C, or D.
– Fix Record Inspection dialog inconsistent appearance.
– Fix Clustering MM Fill Ratio criteria cannot be selected.
– Fix Edge get using circular or radial direction does not detect any edge point.
– Add Export and Import Inspection Data Table calculator functions.
– Fix Calculator Function “Is Connected to OPC server?”
– Add OPC Client Disconnect from Server calculator function.
– Add OPC Server parameter name needs option to add parameter type or not.
– Fix Edge get graph crashes Sentry 9000.

7.0.0 Beta Build 38:
– Fix OPC Client List Diplays “Good” Data when not connected.
– Fix OPC Client page “Delete Server” function issue.
– Add Report Generator to create data token needs an automatic field setup.
– Add Report Generator frequency needs to be more explicit.

7.0.0 Beta Build 39:
– Fix Inspection Data Table crashes Sentry 9000.
– Fix Display Inspection Data button slows down Sentry 9000.
– Fix Temporary key may expire when the clock changing at midnight.
– Add Inspection time result for Inspection Task.
– Fix OPC Client reference adjustment.
– Add Math tool needs pass fail result.
– Increase Image dimension limits.
– Add OPC Client needs to have option to create a log for its activities.
– Add SVC 502 camera support.
– Enhance Column and Row Headers need to be locked in Data and Area Table.

7.0.0 Build 40:
– Fix Math tool always failing.
– Fix OPC Client is connected? may cause Sentry 9000 to crash.
– Enhance Image dimension max increased to 144K.
– Fix Auto-exposure area will lock up system.
– Add histogram as one of Chart type.
– Fix Graph scaling function on Axes page does not work.
– Fix Find Text in tool is incomplete.
– Fix Remove camera type SVS_502E color camera.
– Add run inspection and run operator interface toolbars.
– Fix Inspection area rotation without keyboard.
– Fix Debug break point condition cannot be assigned.
– Fix Tool displayed as failing tool in Tool Summary and Inspection Flow toolbox.
– Fix Simple clustering allocation failure.
– Enhance Wider Trigger Position and Strobe Position drop down boxes.
– Enhance Rearrange I/O comment.
– Add Flow control based on global pass/fail.
– Fix Zoom position is not saved.
– Add Ability to specify operator interface refresh rate.

7.0.0 Build 41:
– Fix Cannot open Distance Measurement dialog.
– Enhance Data table rows and colums max increased to 2048.
– Fix Simple clustering with merging requires large memory.
– Enhance Load Image File rotate option. Document version increased to 707.
– Fix Copy Chart will not keep the reference data into the copied chart.
– Fix Add row and column in Data and Area Table needs to move to the next row.
– Fix Surface Normalization is broken when using new area style.
– Fix Default values for some of calculator functions.
– Enhance File New dialog.
– Add Calculator save screen capture function.
– Fix Defect Map stops inspection.
– Fix New virtual keyboard entry for password does not recognize the virtual “enter”.
– Add Chart Histogram results need to be accessible.
– Enhance Chart Histogram maximum groups need to be increased (32->48).
– Enhance Report generator fields limit needs to be increased (255->320).
– Fix Calculator does not duplicate color images to generic or other color image window.
– Fix Color image file buffering crashes Sentry 9000.
– Fix Defect map color image tool tip doesn’t display correctly.
– Fix Discrete defect map doesn’t save PNG format.
– Fix Operator Interface button will not display data table value.
– Fix Color camera rgb gain is defined only by device.

7.0.0 Build 42:
– Fix Generic camera as the first camera crashes Sentry 9000.
– Fix Operator interface button password protection is not retained.
– Fix Edge get graph does not show the threshold line.
– Add Ability to setup OPC Client items offline.
– Fix Color match tool result is incorrect.
– Add Generic color camera.
– Fix Table template column header spelling is incorrect.
– Add Color camera image capture parameters.
– Add Duplicate image mask calculator function.
– Fix Get status of OPC Server crashed the system.

7.0.0 Build 43:
– Fix Calculator referencing OPC Client Local Data is not saved.
– Enhancement: OPC Client on separate thread.
– Fix Create Area based on clusters crashed Sentry 9000.
– Fix Defect map catalog crashes Sentry 9000.
– Fix Numerical error on the defect map report after splicing.
– Fix Cutting a portion of defect map crashes Sentry 9000.
– Fix Adv clustering merge error.
– Fix Chart tool crashes Sentry 9000.
– Fix Advanced Clustering criteria text boxes are not long enough.
– Fix Math Tool If statement does not execute correctly.
– Fix Editing Inspection Interface Remote Control button crashes Sentry 9000.
– Fix Collapse all function does not collapse folder inside another folder.
– Fix Report Generator Field labels moves out of view.
– Fix Report Generator Tool “Apply” Button does not create Token/RPT file.
– Fix Operator Interface button flickers.
– Enhancement: Display image on a button including inspection activities.
– Fix System Crashed when Close Application after Changes in Data.
– Add subpixelization term to the enhance edge smoothness option.
– Rename Random Noise Filter to Image Morphology.
– Fix Histogram old style area does not have apply button.
– Fix Contour Learn with contour smoothness level 0 crashed the system.
– Add Ability to trigger through OPC.

7.0.0 Build 44:
– Fix: Cut/paste images from cam0 to cam1 consistently crashes the S9K.
– Enhancement: Conditional dual processor prompt needed.
– Fix: Tool Summary does not save the list when application is closed.
– Fix: Verify Library function will change calculator reference to operator panel.
– Add: Display histogram of intensity distribution.
– Enhancement: Data Table memory allocation.
– Fix: Calculator OPC Client operation to a disconnected server crashes Sentry 9000.
– Fix: Image Morphology (Random noise filter) using old area.
– Fix: Camera Trigger Position is always shown as None.
– Fix: Connecting to invalid OPC Server locks up Sentry 9000.
– Fix: Free running Camera Link with 0 exposure time crashes Sentry 9000.

7.0.0 Build 45:
– Fix: Subroutine string parameter missing last character.
– Enhancement: Increase the number of operator buttons to 96.
– Enhancement: Ability to snap to grid for the operator interface.
– Add: Defect Map Web Wander.
– Fix: Tool bar does not show correctly in 800 x 600 screen resolution.
– Add: Report Header needs ability to reference.
– Fix: Report generator creates double entries when it is set to time based.
– Fix: Report generator removed reset source option on the advanced page.
– Enhancement: Report generator needs to show directory of separate shift reports.
– Fix: OPC Client Retrieve from Device doesn’t update local data.
– Fix: Ref. Camera Marker Position became zero in Inspection Task tool.
– Fix: Sentry SVM V7.5, saving after importing Library Bug.
– Fix: Saving clustering tool with invalid old style area locator will corrupt s9k file.
– Fix: Pareto chart auto add data items.
– Fix: Inspection Task activated by OPC Client Text Message.
– Fix: Color Match tool identify wrong color.
– Fix: Edit System Setup an Application with OPC offline will crash the system.
– Fix: Edge Get Graph is not correct when using noise and fuzziness reduction.
– Fix: Saving image as PNG is slow.
– Fix: Display Inspection Area Tables.
– Fix: OPC Client value of number has space at the end.
– Fix: Duplicate image mask to/from invalid camera crashes Sentry 9000.
– Enhancement: Post Item tool ability to set output bits on multiple I/O boards.
– Fix: Loop count doesn’t start from starting value (first index).
– Fix: Remote Tool Transfer cannot send color image.

7.0.0 Build 46:
– Fix: Distance Measurement reference which data.
– Add: Operator message length.
– Fix: Rotate Color Image doesn’t transfer Hue and Saturation values.
– Enhancement: Color Match tool enhancements.
– Fix: Color Match tool Target and Tolerance values retrieval return 0.
– Fix: Blank OPC Client Server ID crashes Sentry 9000.
– Enhancement: Reduce waiting time for operator interface related calculator functions.

7.0.0 Build 47:
– Add: Button function to open I/O Activity.
– Fix: OPC Client Add Item button disabled.
– Fix: OPC Client WTclient.dll demo version.
– Fix: Retrieve Inspection Data does not work.
– Fix: Export Inspection Data Table doesn’t work.
– Fix: Simple clustering with multiple areas and without merging doesn’t work.
– Enhancement: Select all image file names.
– Fix: Duplicate Image Mask between color and grey scale camera.
– Fix: Pause image display on fail still refreshing inspection activities.

7.0.0 Build 48:
– Enhancement: Ignore masked region in histogram tool.
– Fix: Camera Link advanced parameters.
– Fix: Sync count displayed incorrect.
– Enhancement: Image file dialog default option.
– Fix: Sentry 9000 crashes when converting subroutine to library.
– Enhancement: Image morphology tool is slow.
– Fix: Enable/Disable Interface Panel button function.
– Add: Saving and reviewing image.
– Fix: Apply button does not work on a disabled calculator.
– Fix: Data Item created Post Item but no name.
– Add: Place Holder buttons.
– Add: Circle Wrap tool.
– Add: Reset Camera calculator function.

7.0.0 Build 49:
– Fix: Changing operator interface button from displaying chart value to chart label crashes Sentry 9000.
– Fix: Button on Free Style operator interface panel disappear.
– Enhancement: Multi-level place holder operator interface.

7.0.0 Build 50:
– Fix: Misspelling in Image Enhance dialog.
– Fix: Exposure Delay is shown.
– Fix: Flip Captured Image option is not shown.
– Enhancement: Hide non-place holder panels while in place holder mode.
– Fix: Out of range valid intensity.
– Fix: Buttons undeleting themselves.

7.0.0 Build 51:
– Fix: OPC server settings are not saved.
– Fix: Editing data item with invalid camera crashes Sentry 9000.
– Fix: Deleting operator interface panel crashes Sentry 9000.
– Fix: Cancelling Edit All Panels crashes Sentry 9000.
– Enhancement: OPC Client local data in WindowsXP SP3 is not refreshed.
– Enhancement: Remote Tool Transfer sending timeout.

7.0.0 Build 52:
– Add: OPC Client Activity.
– Add: Independentl IO Delay Setting for Individual Virtual Camera.

7.0.0 Build 53:
– Fix: Calculator Divide function, division by zero result.
– Fix: Rename I/O Delay to Number of Output Shift Register.
– Fix: OPC Client Delete Item crashes Sentry 9000.
– Fix: Report Generator call Subroutine on shift change does not work.
– Fix: Fix crashing during Sentry 9000 reboot.
– Fix: OPC Client Write to Device with Result Window and moving OPC Client Activity cause Sentry 9000 to stop responding.
– Add: Calculator ‘Difference’ function.
– Enhnacement: Help About Sentry 9000… halts inspection.
– Mod: Report Generator generating production token: skip first 2 from skip 1.
downtime token: no skipping from skip 1.

7.0.0 Build 54:
– Fix: Report generator generates token on closeout.
– Enhancement: Defect Map enhancements.
– Fix: Circular Warp destination camera activities retained.
– Fix: Circular Warp for color camera.
– Fix: Circular Warp destination dimension less than needed.
– Add: OPC Client Server Last Update Time.
– Add: Calculator Time Difference function.

7.0.0 Build 55:
– Fix: Tool search for circular warp tool is missing.
– Fix: Circular warp tool dialog title is circular wrap.
– Fix: Circular Edge Linearization tool.
– Enhancement: OPC Client Local Data update.
– Enhancement: OPC Client Local Data Update Rate.

7.0.0 Build 56:
– Enhancement: Camera Link com port setting.
– Enahncement: Defect Map Catalog problems.
– Fix: Area inside Area Table with reference position does not update.
– Enhancement: The image list length is limited to 10 images.
– Fix: Camera Strobe Position is always shown as None.
– Enhancement: Operator Interface calculator functions slow down inspection.

7.0.0 Build 57:
– Fix: Contour Learn with contour smoothness level 0 crashed the system.
– Add: Image Re-size tool.
– Fix: Rotate Image tool crashes Sentry 9000.
– Fix: Editing calculator cause Sentry 9000 to hang.

7.0.0 Build 58:
– Add: Enable/Disable Auto-save.

7.0.0 Build 59:
– Enhancement: Auto-save indication.
– Enhancement: Choosing Use Saved Images should automatically display the Use Image Toolbox.
– Fix: Copy and paste inspection data table.
– Enhancement: Changing list results of clustering to criteria results.
– Fix: Show Defect Map button does not bring up the defect map on the operator interface.
– Fix: Display Button of Camera Image does not work on generic camera.
– Fix: Cannot set an output bit.
– Fix: 1 tap line scan camera.
– Enhancement: Sync Triggered indication.
– Fix: Error creating a library with data folder inside library folder.

7.0.0 Build 60:
– Add: Circular Arc Inspection Area.
– Add: Button function to OpInterface for “View OPC Client Activity”.
– Fix: Report Generator not able to extract string name from Data Table.
– Add: Pareto Chart needs ability to display limited number of data.
– Fix: Read Field from Text File always return blanks.
– Add: Circular Arc Region Inspection Area.
– Add: Service task called at the completion of camera device triggered task.
– Add: Access to graph fail and warning limits.
– Add: Repeating discrete defect map detection.
– Enhancement: Relative Calibration Reference.
– Add: Asynchronous Receive through RSLinx.
– Fix: Add or Edit Operator Dialog allows user to see others’ passwords.
– Fix: Operator list without an operator with level 0 password is allowed.
– Fix: Entering Engineering Interface with invalid password level.
– Fix: Spurious Edge Filter default values.
– Enhancement: Operator button functions that assign value needs password option.
– Enhancement: Need ability to login and logout in the operator interface.
– Enhancement: Reject List Issues.
– Fix: Zoom panel (image place holder panel) issues.

7.0.0 Build 61:
– Fix: No Inspection Flow toolbox.
– Fix: Distance measurement from/to inspection area.
– Fix: No Warning Message for Invalid Level Number in OI Button.
– Fix: Change Password in OI Need to Clear the Second Time.
– Fix: Multiple Change Password Box Hung.
– Fix: Going offline in system with frame triggered Camera Link camera takes long time.
– Enhancement: Built-in default button bitmap.
– Fix: Cannot specify list of values for Assign Tool Data button.

7.0.0 Build 62:
– Add: Goto Operator Interface Panel button function.
– Add: (Elliptical) Arc Region Inspection Area.
– Add: Discrete Defect Map ability to exclude category from defective units calculation.
– Enhancement: Option to disable OPC Client Local Data Update Rate.
– Enhancement: Data Item needs to have occurrence counts.
– Enhancement: Discrete Defect Map needs to have occurrence count for each category.
– Enhancement: Token generation from Report Generator need to be simpler.
– Enhancement: Default Values for Simple Clustering.
– Enhancement: Reject List Enhancement.
– Fix: Snap-to-grid issues.
– Fix: Out of Memory Error.
– Fix: Ellipse Fit Bug.
– Fix: Add new tool while editing another tool causes crash.
– Fix: “Zoom In/Out” buttons should be grayed out while the inspection is running.
– Fix: Remote Diagnostics Problem.
– Fix: Ungrouping a composite area crashes Sentry 9000.
– Fix: Grouping areas crashes Sentry 9000.
– Fix: Inspection Area Edit dialog annoyance.
– Fix: Discrete Defect Map XLS report.
– Fix: Discrete defect map zoom functions are backward.
– Enhancement: Sentry 9000 interaction with SentryPoint.

7.0.0 Build 63:
– Fix: CR01291 Locate Extremum Edge Point tool lacking.
– Fix: CR01293 Discrete defect map doesn’t draw defects.
– Fix: CR01298 Clicking on password protected button does not execute the button function.
– Fix: CR01302 Previous operator name is retained.
– Fix: CR01303 Deleted camera name is still displayed.
– Fix: CR01305 Adding Button for “Zoom” option does not work properly.
– Fix: CR01311 Memory leaks.
– Fix: CR01312 Keep increasing memory usage.
– Fix: CR01314 Report Generator – While adding new Fields, the Field Header Value Remains the Same.
– Enhancement: CR01292 Report Generator Database Token Location.
– Enhancement: CR01294 Ability to specify camera sequence.

7.0.0 Build 64:
– Enhancement: CR01313 Simple Clustering “Ignore clusters…” default values do not make sense.
– Enhancement: CR01315 Limited Range of Adjustment for Areas and Input Dialogs.
– Enahncement: CR01316 Inspection Recorder enhancements.
– Fix: CR01317 Misspelling Draw Arc Region bubble help.
– Fix: CR01318 Need more information to be displayed on Arc area editing.
– Fix: CR01329 Button displaying remote operator panels causes panel to disappear.
– Fix: cr01330 Spatial Filter Graphics Refresh Bug.

7.0.0 Build 65:
– Enhancement: CR01332 Ability to open multiple Sentry 9000 developer version at the same time.
– Fix: CR01338 Simple Clustering’s mask small clusters option crashes Sentry 9000.
– Fix: CR01320 Include Operator Panels does not work correctly when saving library.
– Fix: CR01321 Adjust Area dialog is grayed out.
– Fix: CR01334 No option to “Paste Below” when copying Inspection Task or Subroutine.
– Fix: CR01339 Fail to add inspection library.
– Fix: CR01340 Fail to create new inspection from template.
– Fix: CR01342 Reviewing image file using Image File Toolbox causes sentry 9000 to crash.
– Fix: CR01325 Default Display Update needs to be 300 ms.
– Fix: CR01333 Sentry 9000 crashes when clicking “X” on Tool Workspace.
– Fix: CR01343 Saving inspection with many operator interface panels is slow.
– Fix: CR01327 Display Image File Toolbox inconsistency.
– Fix: CR01341 Image File Toolbox needs bubble text.

7.0.0 Build 66:
– Fix: CR01348 Garbled text in Results window for “Annotate Defect Map” function.
– Fix: CR01349 Limited Range Line-Area Bugs.
– Fix: CR01350 Limited Range Rectangle-Area crashes system.
– Fix: CR01355 Odd behavior when editing tool properties of Defect Map.
– Fix: CR01356 Add “Limit…” to the right-click menu on area workspace.
– Enhancement: CR011358 Simple Clustering parameter access.
– Fix: CR01359 Diagnostic menu Inconsistent Name.
– Fix: CR01360 Circular warp parameters need to have units.
– Enhancement: CR01361 Circular warp overlap unit is better in degree instead of pixels.
– Enhancement: CR01364 Data Item page: multiple boards will be better if displayed in multiple tabs.
– Enhancement: CR01344 Advanced Clustering Tolerance Page Annoyance.
– Fix: CR01366 Inspection Recorder destination.
– Enhancement: CR01365 Occurrence count not on Data Item Dialog.
– Fix: CR01336 Defective Image review from Image List skips.
– Enhancement: CR01370 Rotate Image tool parameters access.
– Fix: CR01390 Incorrect edge get graph.
– Enhancement: CR01409 Version 7 license based on permanent MAC address.
– Fix: CR01433 Graph displays random lines across button.

7.0.0 Build 67:
– Enhnacement: CR01420 Increase Camera Link max. devices to 4.
– Fix: CR01429 Cannot assign Ellipse Fit center points.
– Fix: CR01414 Sentry 9000 freezes after stopping when “Stop on Fail” is enabled.
– Fix: CR00907 Image Capture Out Of Boundary Condition.
– Fix: CR01393 Inspection Recorder Default prompt button.
– Fix: CR01410 Area Limits Angle Default Value.
– Fix: CR01423 Wrong image file name displayed in Camera window titlebar.
– Fix: CR01430 Production token generation changes the reject id to lower case.
– Fix: CR01431 I/O settings changes are not saved.
– Fix: CR01432 I/O control tool is failing.
– Fix: CR01369 Diagnostic Menu lacks Result Window Search.
– Fix: CR01289 “Pause Display” does not seem to work for Virtual Camera inspections.
– Fix: CR01437 Report generator tool does not use AM/PM indication to calculate shift.
– Enhancement: CR01441 Post/Reset Item enhancement.
– Fix: CR01444 Report Generator call Subroutine on shift change does not work.
– Add: CR01445 Search function for Area workspace.
– Add: CR01446 Search function for Data workspace.
– Enhancement: CR01459 Inspection Recorder deletes inspeciton sequence without warning.
– Add: CR01461 Ability to highlight area and/or data.
– Fix: CR01462 Edge get with intensity exclusion does not behave correctly.
– Fix: CR01453 “Demo License Expired” message should read “Developer”.
– Enhancement: CR01460 New inspection area should appear in center of view, not cam window.
– Fix: CR01450 Inspection Area stays highlighted.
– Fix: CR01464 Converting subroutine to library crashes Sentry 9000.
– Fix: CR01477 Calculator flow control does not behave properly for NOT function.
– Enhancement: CR01497 Defect count by lane.

6.0.3 Build 14:
– Fix: CR00515 Sentry 9000 crash after several times changing the average intensity in the inspection criteria of the advanced clustering tool.
– Fix: CR00542 Sentry 9000 crash because the “Open Existing Application” selection in the File New Dialog. It needs to delay opening of existing application until the end of the file new process.
– Fix: CR00585 Sentry 9000 when trying to add an inspection item tool in the data workspace
– Fix: CR00607 Sentry 9000 crash when delete a camera through system setup
– Fix: CR00608 Column name (column header) in the Data Table Group is not in the right iteration.
– Fix: CR00609 Edit Advanced Camera setup, show the “Digitizer Configuraton” instead of “Digitizer Configuration”
– Fix: CR00618 Flip option in the “Rotate Image” tool does not flip the image correctly when the angle is 0.
– Fix: CR00623 List of items in the Chart tool cannot display the whole name after more than 10 items.
– Fix: CR00624 Percentage on the chart or graph does not follow the display resolution (always integer).
– Fix: CR00638 Spot Check tool does not save the allowable deviation values when the dialog is closed.
– Fix: CR00643 Calculator refereces to Data Table Group is not updated when any rows or columns are deleted in the Data Table Group.
– Fix: CR00644 Calculator function “Assign Inspection Data Table” and “Assign Inspection Area Table” second operand reference is not updated.
– Fix: CR00655 An image window is disabled when file saved. Re-open the file enable the image capture or its group.
– Fix: CR00662 Inspection Data Table Group has some bugs in the row operation, especially adding new row.
– Fix: CR00665 Switch to another tab command does not need the word “try” to make it a proper English.
– Fix: CR00677 Two operator interface “Assign tool data based on a list of values” buttons pointing to the same tool are disconnected.
– Fix: CR00678 Strobe position was moved from Interupt I/O definition to the Camera Definition.
– Fix: CR00680 Area referencing other areas does not stay after importing an Inspection Library.
– Fix: CR00682 Converting an Inspection Library into a Subroutine still links to the Area and Data Folder.
– Fix: CR00683 Exporting a subroutine into an Inspection Library does not have option which operator interface to be included.
– Fix: CR00686 Changing calibrated pixel scale in the Edit System Setup does not change the defect map results.
– Enhancement: CR00612 The clustering tool with type “Relative to background intensity” have the ability for the user to exclude intensity for the background calculation. The exclusion values can also be asigned from calculator for dynamic background intensity calculation.
– Enhancement: CR00614 Rotate Image Tool has more post processing options:
a.Flip the rotated image horizontally, vertically, or both directions
b.Add background image of the second area
c.Multiply rotated image by a constant
d.Offset rotate image
e.Invert rotated image
f.Clip the result intensity below certain intensity and/or above another intensity
Additionally, the result (rotated image) can be placed in the same camera window as the original image.
– Enhancement: CR00628 Local name or label for cameras customizable by users. The default name is still cam0, cam1, etc.
– Enhancement: CR00625 Local name for I/O Control Bit. Users have the ability to create labels for every bit in the setup I/O page so that it will be easier to debug or to maintain.
– Enhancement: CR00626 There will be warning if the output signal duration is greater than the maximum cycle time.
– Enhancement: CR00639 Defect Map tool has more options for the size of saved image: 100×100, 200×200, 300×300, 400×400, 500×500, 1Kx1K, full image
– Enhancement: CR00640 Defect Catalog images has lines to show where the defect position is so that the user can easily locate the defect
– Enhancement: CR00641 Calculator has access to the number of tables, number of rows, and number of columns of a Data Table Group. Calculator can also assign the current selected table, row, and column independently.
– Enhancement: CR00644 New function in calculator: “Open text file for reading” and “Read text file”.
– Enhancement: CR00645 Users have access to defect map summary entries. This intended for flexibility by providing ability to generate summary manually through the use of report generator tool.
– Enhancement: CR00647 New function in calculator to read from the user INI file. Users need to specify the INI file name and the INI file section and/or the INI file entry.
– Enhancement: CR00648 Report generator has more options for the report type: RPT, XLS, or both types.
– Enhancement: CR00651 Data Table Group and Area Table Group have the ability to be referenced by their column dinamically.
– Enhancement: CR00679 New Calculator function to access the pass/fail condition of a certain tool.
– Enhancement: CR00684 Defect Map saving has more options to save the defect map, save the RPT report, and save the XLS report.

6.0.3 Build 15:
– Fix: CR578 Dissasosiate Defect Map tool name from Defect Map Title
– Fix: CR662 Problems with row operations in Data Table
– Fix: CR681 Library with areas reference areas lost all the references
– Fix: CR686 Changing calibration pixel scales does not change the Defect Map results
– Fix: CR687 I/O page does not have I/O position number
– Fix: CR688 Multiple intensity bins doesn’t work properly
– Fix: CR690 Changing product in an application with Defect Maps crashes
– Fix: CR692 Changing product to a more than 8 products crashes
– Fix: CR701 New calculator doesn’t default at the selected tool name
– Fix: CR702 Sentry 9000 doesn’t keep the latest engineering interface window position
– Fix: CR705 Exposure mode and video mode combo box crashes the system
– Fix: CR706 Defect Map has artificial extra cycle at the beginning of inspection
– Fix: CR707 Saving Defect Map with offset leader crashes the system
– Enhancement: CR625 Local name for each I/O control bit
– Enhancement: CR684 More saving options for Defect Map Tool
– Enhancement: CR648 Report Generator can generate Excel report
– Enhancement: CR669 Edge Get graph default position is based on the Edge Detection method
– Enhancement: CR679 Pass fail condition of an individual tool can be accessed from Calculator Tool
– Enhancement: CR689 Camera calibration page is not shown in the demo version
– Enhancement: CR691 Total number of fields in the Report Generator Tool has been increased from 12 fields to 32 fields
– Enhancement: CR693 Advanced Clustering criterias has been re-group to make it easier to understand
– Enhancement: CR694 New calculation options for fill ratio in Advanced Clustering Tool
– Enhancement: CR699 New parameter “Offset leader” has been added to Defect Map Tool

+ Version 8.0 - Build 33

8.0.0 Alpha Build 2:
– Add: Reset Camera calculator function.
– Fix: Changing operator interface button from displaying chart value to chart label crashes Sentry 9000.
– Fix: Button on Free Style operator interface panel disappear.
– Enhancement: Multi-level place holder operator interface.

8.0.0 Alpha Build 3:
– Fix: Misspelling in Image Enhance dialog.
– Fix: Exposure Delay is shown.
– Fix: Flip Captured Image option is not shown.
– Enhancement: Hide non-place holder panels while in place holder mode.
– Fix: Out of range valid intensity.
– Fix: Buttons undeleting themselves.
– Fix: OPC server settings are not saved.
– Fix: Editing data item with invalid camera crashes Sentry 9000.
– Fix: Deleting operator interface panel crashes Sentry 9000.
– Fix: Cancelling Edit All Panels crashes Sentry 9000.
– Enhancement: OPC Client local data in WindowsXP SP3 is not refreshed.

8.0.0 Alpha Build 4:
– Enhancement: Remote Tool Transfer sending timeout.

8.0.0 Alpha Build 5:
– Fix: Opening an application with defect map tool will fail.
– Fix: Adding Defect Map Tool crashed the systems.

8.0.0 Alpha Build 6:
– Add: OPC Client Activity.
– Fix: TCP/IP crashes Sentry 9000 on multi-processors system.

8.0.0 Alpha Build 7:
– Add: Independent IO Delay Setting for Individual Virtual Camera.
– Fix: Calculator Divide function, division by zero result.

8.0.0 Alpha Build 8:
– Fix: Rename I/O Delay to Number of Output Shift Register.
– Fix: OPC Client Delete Item crashes Sentry 9000.

8.0.0 Alpha Build 9:
– Fix: Report Generator call Subroutine on shift change does not work.
– Fix: Fix crashing during Sentry 9000 reboot.
– Fix: OPC Client Write to Device with Result Window and moving OPC Client Activity cause Sentry 9000 to stop responding.

8.0.0 Alpha Build 10:
– Add: Calculator ‘Difference’ function.
– Enhnacement: Help About Sentry 9000… halts inspection.
– Mod: Report Generator generating production token: skip first 2 from skip 1.
downtime token: no skipping from skip 1.
– Fix: Report generator generates token on closeout.
– Enhancement: Defect Map enhancements.
– Enhancement: License check.

8.0.0 Alpha Build 11:
– Fix: Circular Warp destination camera activities retained.
– Fix: Circular Warp for color camera.
– Fix: Circular Warp destination dimension less than needed.
– Add: OPC Client Server Last Update Time.
– Add: Calculator Time Difference function.
– Fix: Tool search for circular warp tool is missing.
– Fix: Circular warp tool dialog title is circular wrap.
– Fix: Circular Edge Linearization tool.
– Enhancement: OPC Client Local Data update.
– Fix: Use Image file when actual SVC device is present.

8.0.0 Build 12:
– Enhancement: OPC Client Local Data Update Rate.
– Enhancement: Camera Link com port setting.

8.0.0 Build 13:
– Enahncement: Defect Map Catalog problems.
– Fix: Reference intensities of image capture with auto exposure.
– Fix: Area inside Area Table with reference position does not update.
– Enhancement: The image list length is limited to 10 images.

8.0.0 Build 14:
– Fix: Contour Learn with result window open will crash the system
– Fix: Camera Strobe Position is always shown as None.
– Enhancement: Operator Interface calculator functions slow down inspection.
– Fix: Contour Learn with contour smoothness level 0 crashed the system.
– Add: Image Re-size tool.
– Fix: Rotate Image tool crashes Sentry 9000.
– Fix: Editing calculator cause Sentry 9000 to hang.
– Add: Enable/Disable Auto-save.
– Enhancement: Auto-save indication.
– Enhancement: Choosing Use Saved Images should automatically display the Use Image Toolbox.
– Fix: Copy and paste inspection data table.
– Enhancement: Changing list results of clustering to criteria results.
– Fix: Camera exposure delay is not saved properly.
– Fix: Show Defect Map button does not bring up the defect map on the operator interface.
– Fix: Display Button of Camera Image does not work on generic camera.
– Fix: SVS Camera Strobe position show as None.
– Fix: Cannot set an output bit.
– Fix: 1 tap line scan camera.
– Enhancement: Sync Triggered indication.
– Fix: Error creating a library with data folder inside library folder.

8.0.0 Build 15:
– Add: Rotation options in the Contour Matching Tool.
– Add: Circular Arc Inspection Area.
– Add: Button function to OpInterface for “View OPC Client Activity”.
– Fix: Report Generator not able to extract string name from Data Table.
– Add: Pareto Chart needs ability to display limited number of data.
– Fix: Read Field from Text File always return blanks.
– Add: Circular Arc Region Inspection Area.
– Add: Service task called at the completion of camera device triggered task.
– Add: Access to graph fail and warning limits.
– Add: Repeating discrete defect map detection.

8.0.0 Build 16:
– Fix: Discrete Defect Map.

8.0.0 Build 17:
– Enhancement: Relative Calibration Reference.
– Add: Asynchronous Receive through RSLinx.
– Fix: Add or Edit Operator Dialog allows user to see others’ passwords.
– Fix: Operator list without an operator with level 0 password is allowed.
– Fix: Entering Engineering Interface with invalid password level.
– Fix: Reading Discrete Defect Map tool from inspection library crashes Sentry 9000.
– Fix: Spurious Edge Filter default values.
– Enhancement: Operator button functions that assign value needs password option.
– Enhancement: Need ability to login and logout in the operator interface.
– Enhancement: Reject List Issues.
– Fix: Zoom panel (image place holder panel) issues.
– Fix: Discrete Defect Map Left Label and Legend.

8.0.0 Build 18:
– Fix: No Inspection Flow toolbox.
– Fix: Distance measurement from/to inspection area.
– Fix: No Warning Message for Invalid Level Number in OI Button.
– Fix: Change Password in OI Need to Clear the Second Time.
– Fix: Multiple Change Password Box Hung.
– Fix: Going offline in system with frame triggered Camera Link camera takes long time.
– Enhancement: Built-in default button bitmap.
– Fix: Cannot specify list of values for Assign Tool Data button.

8.0.0 Build 19:
– Add: Goto Operator Interface Panel button function.
– Add: (Elliptical) Arc Region Inspection Area.
– Add: Discrete Defect Map ability to exclude category from defective units calculation.
– Enhancement: Option to disable OPC Client Local Data Update Rate.
– Enhancement: Data Item needs to have occurrence counts.
– Enhancement: Discrete Defect Map needs to have occurrence count for each category.
– Enhancement: Token generation from Report Generator need to be simpler.
– Enhancement: Default Values for Simple Clustering.
– Enhancement: Reject List Enhancement.
– Fix: Snap-to-grid issues.
– Fix: Out of Memory Error.
– Fix: Ellipse Fit Bug.
– Fix: Add new tool while editing another tool causes crash.
– Fix: “Zoom In/Out” buttons should be grayed out while the inspection is running.
– Fix: Remote Diagnostics Problem.
– Fix: Ungrouping a composite area crashes Sentry 9000.
– Fix: Grouping areas crashes Sentry 9000.
– Fix: Inspection Area Edit dialog annoyance.
– Fix: Discrete Defect Map XLS report.
– Fix: Discrete defect map zoom functions are backward.

8.0.0. Build 20:
– Enhancement: Sentry 9000 interaction with SentryPoint.

8.0.0. Build 21:
– Fix: CR01291 Locate Extremum Edge Point tool lacking.
– Fix: CR01293 Discrete defect map doesn’t draw defects.
– Fix: CR01298 Clicking on password protected button does not execute the button function.
– Fix: CR01302 Previous operator name is retained.
– Fix: CR01303 Deleted camera name is still displayed.
– Fix: CR01305 Adding Button for “Zoom” option does not work properly.
– Enhancement: CR01292 Report Generator Database Token Location.
– Enhancement: CR01294 Ability to specify camera sequence.

8.0.0. Build 22:
– Fix: CR01311 Memory leaks.
– Fix: CR01312 Keep increasing memory usage.
– Fix: CR01314 Report Generator – While adding new Fields, the Field Header Value Remains the Same.
– Enhancement: CR01313 Simple Clustering “Ignore clusters…” default values do not make sense.
– Enhancement: CR01315 Limited Range of Adjustment for Areas and Input Dialogs.
– Enahncement: CR01316 Inspection Recorder enhancements.
– Fix: CR01317 Misspelling Draw Arc Region bubble help.
– Fix: CR01318 Need more information to be displayed on Arc area editing.
– Fix: CR01329 Button displaying remote operator panels causes panel to disappear.
– Fix: CR01330 Spatial Filter Graphics Refresh Bug.
– Enhancement: CR01331 Contour learn parameters access.
– Enhancement: CR01332 Ability to open multiple Sentry 9000 developer version at the same time.
– Add: CR01337 Assign Inspection Area Data.
– Fix: CR01338 Simple Clustering’s mask small clusters option crashes Sentry 9000.
– Fix: CR01320 Include Operator Panels does not work correctly when saving library.
– Fix: CR01321 Adjust Area dialog is grayed out.
– Fix: CR01334 No option to “Paste Below” when copying Inspection Task or Subroutine.
– Fix: CR01325 Default Display Update needs to be 300 ms.
– Fix: CR01333 Sentry 9000 crashes when clicking “X” on Tool Workspace.
– Fix: CR01343 Saving inspection with many operator interface panels is slow.
– Fix: CR01327 Display Image File Toolbox inconsistency.
– Fix: CR01341 Image File Toolbox needs bubble text.
– Fix: CR01348 Garbled text in Results window for “Annotate Defect Map” function.
– Enhancement: CR01351 Software security.
– Fix: CR01433 Graph displays random lines across button.

8.0.0. Build 23:
– Fix: CR01349 Limited Range Line-Area Bugs.
– Fix: CR01350 Limited Range Rectangle-Area crashes system.
– Fix: CR01355 Odd behavior when editing tool properties of Defect Map.
– Fix: CR01356 Add “Limit…” to the right-click menu on area workspace.
– Enhancement: CR011358 Simple Clustering parameter access.
– Fix: CR01359 Diagnostic menu Inconsistent Name.
– Fix: CR01360 Circular warp parameters need to have units.
– Enhancement: CR01361 Circular warp overlap unit is better in degree instead of pixels.
– Enhancement: CR01364 Data Item page: multiple boards will be better if displayed in multiple tabs.
– Enhancement: CR01344 Advanced Clustering Tolerance Page Annoyance.
– Fix: CR01366 Inspection Recorder destination.
– Enhancement: CR01365 Occurrence count not on Data Item Dialog.
– Fix: CR01336 Defective Image review from Image List skips.
– Enhancement: CR01370 Rotate Image tool parameters access.
– Fix: CR01371 Contour Match Tool is not reliable for small model.
– Fix: CR01372 Contour Learn Tool cannot display anchor points for diagnostic purpose.
– Fix: CR01390 Incorrect edge get graph.

8.0.0. Build 24:
– Fix: CR01415 Contour Learn tool default parameters need to be refined.
– Fix: CR01419 Contour Learn does not display contour if dialog to apply model prompted.
– Enhnacement: CR01420 Increase Camera Link max. devices to 4.
– Add: CR01422 Sentry 9000 Base and Standard version.

8.0.0 Build 25:
– Add: CR01421 Add firewire camera.
– Fix: CR01377 Contour Match Tool not updating the result window properly.
– Fix: CR01378 Contour Match Percentage reported inconsistently.
– Fix: CR01429 Cannot assign Ellipse Fit center points.
– Fix: CR01376 Contour Learn color change erases model.
– Fix: CR01405 Contour Learn tool Rebuild button not available.
– Fix: CR01414 Sentry 9000 freezes after stopping when “Stop on Fail” is enabled.
– Fix: CR01393 Inspection Recorder Default prompt button.
– Fix: CR01410 Area Limits Angle Default Value.
– Fix: CR01167 Camera type not detected.
– Fix: CR01423 Wrong image file name displayed in Camera window titlebar.
– Fix: CR01408 SVC Cameras reset when using Image Files.
– Fix: CR01430 Production token generation changes the reject id to lower case.
– Fix: CR01431 I/O settings changes are not saved.
– Fix: CR01432 I/O control tool is failing.

8.0.0 Build 26:
– Fix: CR01416 Contour Match Tool needs to have Edge Get tool included inside the tool.
– Fix: CR01374 Copy paste a Contour Learn tool will share the same area folder location
– Fix: CR01434 Undo contour learn deletion crashes Sentry 9000.
– Fix: CR01435 Deleting Contour Learn tool does not delete its result folder.
– Fix: CR01369 Diagnostic Menu lacks Result Window Search.
– Fix: CR01436 Rename AVT Stingray F-504B.
– Fix: CR01289 “Pause Display” does not seem to work for Virtual Camera inspections.

8.0.0 Build 27:
– Fix: CR00875 Need ability to set font size to display on OI buttons.
– Fix: CR01437 Report generator tool does not use AM/PM indication to calculate shift.
– Add: CR01440 New camera type 656N.
– Enhancement: CR01441 Post/Reset Item enhancement.
– Add: CR01442 Text background.

8.0.0 Build 28:
– Fix: CR01443 File will not open.

8.0.0 Build 29:
– Fix: CR01444 Report Generator call Subroutine on shift change does not work.
– Add: CR01445 Search function for Area workspace.

8.0.0 Build 30:
– Add: CR01446 Search function for Data workspace.
– Enhancement: CR01459 Inspection Recorder deletes inspeciton sequence without warning.
– Add: CR01461 Ability to highlight area and/or data.
– Fix: CR01462 Edge get with intensity exclusion does not behave correctly.
– Fix: CR01453 “Demo License Expired” message should read “Developer”.
– Enhancement: CR01460 New inspection area should appear in center of view, not cam window.
– Fix: CR01450 Inspection Area stays highlighted.
– Enhancement: CR01463 Save image file on separate thread.
– Fix: CR01464 Converting subroutine to library crashes Sentry 9000.
– Fix: CR01465 Different behavior on tool display activities.

8.0.0 Build 31:
– Fix: CR01467 Contour match doesn’t perform edge get function.
– Fix: CR01468 Adding PLC for Modbus TCP Client crashes Sentry 9000.
– Enhancement: CR01466 Menu tool bar.
– Add: CR01472 Image file random sequence.

8.0.0 Build 32:
– Add: CR01474 Editable text operator interface button.
– Fix: CR01479 Blank ASI2000 camera Image Type selection.
– Fix: CR01480 Blank ASI2000 camera Signal Gain selection.
– Fix: CR01256 Distance measurement from/to inspection area.
– Add: CR01475 Enable/disable individual calculator tool command.
– Fix: CR01477 Calculator flow control does not behave properly for NOT function.
– Add: CR01481 Blinking operator interface button.
– Fix: CR01482 Remote Inspection Interface.
– Add: CR01483 Login Operator Interface calculator function.
– Add: CR01484 Calculator functions for manipulating blinking button.
– Fix: CR01486 Customized Font not copied with button.
– Fix: CR01489 Camera Link fail to open Com Port.
– Add: CR01490 Option to call subroutine before entering another operator interface panel.
– Fix: CR01491 Contour Learn and Contour Match do not keep changes in Inspection Area.
– Enhancement: CR01496 Location for saved defect map.
– Enhancement: CR01497 Defect count by lane.

8.0.0 Build 33:
– Fix CR01499 Sentry 9000 WinXP version 8.0 with developer license.

+ Version 7.5 SVM - Build 16

7.5.0 Build 2 SVM:
– Fix Cannot open Distance Measurement dialog.
– Enhance Data table rows and colums max increased to 2048.
– Fix Simple clustering with merging requires large memory.
– Enhance Load Image File rotate option. Document version increased to 707.
– Fix Copy Chart will not keep the reference data into the copied chart.
– Fix Add row and column in Data and Area Table needs to move to the next row.
– Fix Surface Normalization is broken when using new area style.
– Fix Default values for some of calculator functions.
– Enhance File New dialog.
– Add Calculator save screen capture function.
– Fix Defect Map stops inspection.
– Fix New virtual keyboard entry for password does not recognize the virtual “enter”.
– Add Chart Histogram results need to be accessible.
– Enhance Chart Histogram maximum groups need to be increased (32->48).
– Enhance Report generator fields limit needs to be increased (255->320).
– Fix Calculator does not duplicate color images to generic or other color image window.
– Fix Color image file buffering crashes Sentry 9000.
– Fix Defect map color image tool tip doesn’t display correctly.
– Fix Discrete defect map doesn’t save PNG format.
– Fix Operator Interface button will not display data table value.
– Fix Color camera rgb gain is defined only by device.

7.5.0 Build 3 SVM:
– Fix Generic camera as the first camera crashes Sentry 9000.
– Fix Operator interface button password protection is not retained.
– Fix Edge get graph does not show the threshold line.
– Add Ability to setup OPC Client items offline.
– Fix Color match tool result is incorrect.
– Add Generic color camera.
– Fix Table template column header spelling is incorrect.
– Add Color camera image capture parameters.
– Add Duplicate image mask calculator function.
– Fix Get status of OPC Server crashed the system.
– Fix Calculator referencing OPC Client Local Data is not saved.
– Enhancement: OPC Client on separate thread.
– Fix Create Area based on clusters crashed Sentry 9000.
– Add Exposure delay for SVS camera.
– Fix Defect map catalog crashes Sentry 9000.
– Fix Numerical error on the defect map report after splicing.
– Fix Cutting a portion of defect map crashes Sentry 9000.
– Fix Adv clustering merge error.
– Fix Chart tool crashes Sentry 9000.
– Fix Advanced Clustering criteria text boxes are not long enough.
– Fix Math Tool If statement does not execute correctly.
– Fix Editing Inspection Interface Remote Control button crashes Sentry 9000.
– Fix Collapse all function does not collapse folder inside another folder.
– Fix Report Generator Field labels moves out of view.
– Fix Report Generator Tool “Apply” Button does not create Token/RPT file.
– Fix System Setup/Add New camera default type.
– Fix Operator Interface button flickers.

7.5.0 Build 4 SVM:
– Enhancement: Display image on a button including inspection activities.
– Enhancement: Disallow another image capture by triggering camera.
– Fix Enable OPC Client crash the system.
– Fix System Crashed when Close Application after Changes in Data.
– Add subpixelization term to the enhance edge smoothness option.
– Rename Random Noise Filter to Image Morphology.
– Histogram old style area does not have apply button.
– Fix Contour Learn with contour smoothness level 0 crashed the system.

7.5.0 Build 5 SVM:
– Add Ability to trigger through OPC.
– Fix: Cut/paste images from cam0 to cam1 consistently crashes the S9K.
– Enhancement: Conditional dual processor prompt needed.
– Fix: Tool Summary does not save the list when application is closed.
– Fix: Verify Library function will change calculator reference to operator panel.
– Add: Display histogram of intensity distribution.
– Enhancement: Data Table memory allocation.
– Fix: Calculator OPC Client operation to a disconnected server crashes Sentry 9000.
– Fix: Image Morphology (Random noise filter) using old area.
– Fix: ASI 2000 Camera Trigger Position is always shown as None.
– Fix: Connecting to invalid OPC Server locks up Sentry 9000.
– Fix: Free running Camera Link with 0 exposure time crashes Sentry 9000.

7.5.0 Build 6 SVM:
– Fix: SVS camera offset incorrect behavior.
– Fix: Subroutine string parameter missing last character.
– Fix: Increase the number of operator buttons to 96.
– Add: Defec Map Web Wander.
– Fix: Tool bar does not show correctly in 800 x 600 screen resolution.
– Add: Report Header needs ability to reference.
– Fix: Report generator creates double entries when it is set to time based.

7.5.0 Build 7 SVM:
– Fix: Report generator removed reset source option on the advanced page.
– Enhancement: Report generator needs to show directory of separate shift reports.
– Fix: OPC Client Retrieve from Device doesn’t update local data.

7.5.0 Build 8 SVM:
– Fix: Ref. Camera Marker Position became zero in Inspection Task tool.
– Fix: Sentry SVM V7.5, saving after importing Library Bug.
– Fix: Saving clustering tool with invalid old style area locator will corrupt s9k file.
– Fix: Pareto chart auto add data items.
– Fix: Inspection Task activated by OPC Client Text Message.

7.5.0 Build 9 SVM:
– Fix: Color Match tool identify wrong color.
– Fix: Edit System Setup an Application with OPC offline will crash the system.
– Fix: Edge Get Graph is not correct when using noise and fuzziness reduction.
– Fix: Saving image as PNG is slow.
– Fix: Display Inspection Area Tables.
– Fix: OPC Client value of number has space at the end.

7.5.0 Build 10 SVM:
– Fix: Duplicate image mask to/from invalid camera crashes Sentry 9000.
– Enhancement: Post Item tool ability to set output bits on multiple I/O boards.
– Fix: Loop count doesn’t start from starting value (first index).
– Fix: Remote Tool Transfer cannot send color image.
– Fix: Distance Measurement reference which data.
– Add: Operator message length.
– Fix: Rotate Color Image doesn’t transfer Hue and Saturation values.
– Enhancement: Color Match tool enhancements.
– Fix: Color Match tool Target and Tolerance values retrieval return 0.
– Fix: Blank OPC Client Server ID crashes Sentry 9000.
– Enhancement: Reduce waiting time for operator interface related calculator functions.
– Add: Button function to open I/O Activity.
– Fix: OPC Client Add Item button disabled.
– Fix: OPC Client WTclient.dll demo version.
– Fix: Retrieve Inspection Data does not work.
– Fix: Export Inspection Data Table doesn’t work.
– Fix: Simple clustering with multiple areas and without merging doesn’t work.
– Enhancement: Select all image file names.
– Fix: Duplicate Image Mask between color and grey scale camera.
– Fix: Pause image display on fail still refreshing inspection activities.
– Fix: Opening S9K application w/ Use Image File on Crashes.
– Enhancement: Ignore masked region in histogram tool.
– Fix: Camera Link advanced parameters.
– Fix: Sync count displayed incorrect.
– Enhancement: Image file dialog default option.
– Fix: Sentry 9000 crashes when converting subroutine to library.
– Enhancement: Image morphology tool is slow.
– Fix: Enable/Disable Interface Panel button function.
– Add: Saving and reviewing image.

7.5.0 Build 11 SVM:
– Fix: Apply button does not work on a disabled calculator.
– Fix: Data Item created Post Item but no name.
– Add: Place Holder buttons.
– Add: Circular Warp tool.

7.5.0 Build 12 SVM:
– Add: Reset Camera calculator function.
– Enhancement: Access to Circular Warp tool parameters.
– Fix: Changing operator interface button from displaying chart value to chart label crashes Sentry 9000.
– Fix: Button on Free Style operator interface panel disappear.
– Enhancement: Multi-level place holder operator interface.
– Fix: Misspelling in Image Enhance dialog.
– Fix: Exposure Delay is shown.
– Fix: Flip Captured Image option is not shown.
– Enhancement: Hide non-place holder panels while in place holder mode.
– Fix: Out of range valid intensity.
– Fix: Buttons undeleting themselves.
– Fix: OPC server settings are not saved.
– Fix: Editing data item with invalid camera crashes Sentry 9000.
– Fix: Deleting operator interface panel crashes Sentry 9000.
– Fix: Cancelling Edit All Panels crashes Sentry 9000.
– Enhancement: OPC Client local data in WindowsXP SP3 is not refreshed.
– Enhancement: Remote Tool Transfer sending timeout.
– Add: OPC Client Activity.

7.5.0 Build 13 SVM:
– Add: Independentl IO Delay Setting for Individual Virtual Camera.

7.5.0 Build 14 SVM:
– Fix: Calculator Divide function, division by zero result.
– Fix: Rename I/O Delay to Number of Output Shift Register.
– Fix: OPC Client Delete Item crashes Sentry 9000.
– Fix: Report Generator call Subroutine on shift change does not work.
– Fix: Fix crashing during Sentry 9000 reboot.
– Fix: OPC Client Write to Device with Result Window and moving OPC Client Activity cause Sentry 9000 to stop responding.
– Add: Calculator ‘Difference’ function.
– Enhnacement: Help About Sentry 9000… halts inspection.
– Mod: Report Generator generating production token: skip first 2 from skip 1.
downtime token: no skipping from skip 1.
– Fix: Report generator generates token on closeout.
– Enhancement: Defect Map enhancements.
– Fix: Circular Warp destination camera activities retained.
– Fix: Circular Warp for color camera.
– Fix: Circular Warp destination dimension less than needed.
– Add: OPC Client Server Last Update Time.
– Add: Calculator Time Difference function.
– Fix: Tool search for circular warp tool is missing.
– Fix: Circular warp tool dialog title is circular wrap.
– Fix: Circular Edge Linearization tool.
– Enhancement: OPC Client Local Data update.
– Fix: Use Image file when actual SVC device is present.
– Enhancement: OPC Client Local Data Update Rate.
– Enhancement: Camera Link com port setting.
– Enahncement: Defect Map Catalog problems.
– Fix: Area inside Area Table with reference position does not update.
– Enhancement: The image list length is limited to 10 images.
– Fix: Camera Strobe Position is always shown as None.
– Enhancement: Operator Interface calculator functions slow down inspection.
– Fix: Contour Learn with contour smoothness level 0 crashed the system.
– Add: Image Re-size tool.
– Fix: Rotate Image tool crashes Sentry 9000.
– Fix: Editing calculator cause Sentry 9000 to hang.
– Add: Enable/Disable Auto-save.
– Enhancement: Auto-save indication.
– Enhancement: Choosing Use Saved Images should automatically display the Use Image Toolbox.
– Fix: Copy and paste inspection data table.
– Enhancement: Changing list results of clustering to criteria results.
– Fix: Camera exposure delay is not saved properly.
– Fix: Show Defect Map button does not bring up the defect map on the operator interface.
– Fix: Display Button of Camera Image does not work on generic camera.
– Fix: Cannot set an output bit.
– Fix: 1 tap line scan camera.
– Enhancement: Sync Triggered indication.
– Fix: Error creating a library with data folder inside library folder.
– Add: Circular Arc Inspection Area.
– Add: Button function to OpInterface for “View OPC Client Activity”.
– Fix: Report Generator not able to extract string name from Data Table.
– Add: Pareto Chart needs ability to display limited number of data.
– Add: Circular Arc Region Inspection Area.
– Add: Service task called at the completion of camera device triggered task.
– Add: Access to graph fail and warning limits.
– Add: Repeating discrete defect map detection.
– Enhancement: Relative Calibration Reference.
– Add: Asynchronous Receive through RSLinx.
– Fix: Add or Edit Operator Dialog allows user to see others’ passwords.
– Fix: Operator list without an operator with level 0 password is allowed.
– Fix: Entering Engineering Interface with invalid password level.
– Fix: Spurious Edge Filter default values.
– Enhancement: Operator button functions that assign value needs password option.
– Enhancement: Need ability to login and logout in the operator interface.
– Enhancement: Reject List Issues.
– Fix: Zoom panel (image place holder panel) issues.
– Add: Goto Operator Interface Panel button function.
– Add: (Elliptical) Arc Region Inspection Area.
– Add: Discrete Defect Map ability to exclude category from defective units calculation.
– Enhancement: Option to disable OPC Client Local Data Update Rate.
– Enhancement: Data Item needs to have occurrence counts.
– Enhancement: Discrete Defect Map needs to have occurrence count for each category.
– Enhancement: Token generation from Report Generator need to be simpler.
– Enhancement: Default Values for Simple Clustering.
– Enhancement: Reject List Enhancement.
– Fix: Snap-to-grid issues.
– Fix: Out of Memory Error.
– Fix: Ellipse Fit Bug.
– Fix: Add new tool while editing another tool causes crash.
– Fix: “Zoom In/Out” buttons should be grayed out while the inspection is running.
– Fix: Remote Diagnostics Problem.
– Fix: Ungrouping a composite area crashes Sentry 9000.
– Fix: Grouping areas crashes Sentry 9000.
– Fix: Inspection Area Edit dialog annoyance.
– Fix: Discrete Defect Map XLS report.
– Fix: Discrete defect map zoom functions are backward.
– Enhancement: Sentry 9000 interaction with SentryPoint.

7.5.0 Build 15 SVM:
– Fix: CR01291 Locate Extremum Edge Point tool lacking.
– Fix: CR01293 Discrete defect map doesn’t draw defects.
– Fix: CR01298 Clicking on password protected button does not execute the button function.
– Fix: CR01302 Previous operator name is retained.
– Fix: CR01303 Deleted camera name is still displayed.
– Fix: CR01305 Adding Button for “Zoom” option does not work properly.
– Fix: CR01311 Memory leaks.
– Fix: CR01312 Keep increasing memory usage.
– Fix: CR01314 Report Generator – While adding new Fields, the Field Header Value Remains the Same.
– Enhancement: CR01292 Report Generator Database Token Location.
– Enhancement: CR01294 Ability to specify camera sequence.
– Enhancement: CR01313 Simple Clustering “Ignore clusters…” default values do not make sense.
– Enhancement: CR01315 Limited Range of Adjustment for Areas and Input Dialogs.
– Enahncement: CR01316 Inspection Recorder enhancements.
– Fix: CR01317 Misspelling Draw Arc Region bubble help.
– Fix: CR01318 Need more information to be displayed on Arc area editing.
– Fix: CR01329 Button displaying remote operator panels causes panel to disappear.
– Fix: CR01330 Spatial Filter Graphics Refresh Bug.
– Enhancement: CR01332 Ability to open multiple Sentry 9000 developer version at the same time.
– Fix: CR01338 Simple Clustering’s mask small clusters option crashes Sentry 9000.
– Fix: CR01320 Include Operator Panels does not work correctly when saving library.
– Fix: CR01321 Adjust Area dialog is grayed out.
– Fix: CR01334 No option to “Paste Below” when copying Inspection Task or Subroutine.
– Fix: CR01325 Default Display Update needs to be 300 ms.
– Fix: CR01333 Sentry 9000 crashes when clicking “X” on Tool Workspace.
– Fix: CR01343 Saving inspection with many operator interface panels is slow.
– Fix: CR01327 Display Image File Toolbox inconsistency.
– Fix: CR01341 Image File Toolbox needs bubble text.
– Fix: CR01348 Garbled text in Results window for “Annotate Defect Map” function.
– Fix: CR01349 Limited Range Line-Area Bugs.
– Fix: CR01350 Limited Range Rectangle-Area crashes system.
– Fix: CR01355 Odd behavior when editing tool properties of Defect Map.
– Fix: CR01356 Add “Limit…” to the right-click menu on area workspace.
– Enhancement: CR011358 Simple Clustering parameter access.
– Fix: CR01359 Diagnostic menu Inconsistent Name.
– Fix: CR01360 Circular warp parameters need to have units.
– Enhancement: CR01361 Circular warp overlap unit is better in degree instead of pixels.
– Enhancement: CR01364 Data Item page: multiple boards will be better if displayed in multiple tabs.
– Enhancement: CR01344 Advanced Clustering Tolerance Page Annoyance.
– Fix: CR01366 Inspection Recorder destination.
– Enhancement: CR01365 Occurrence count not on Data Item Dialog.
– Fix: CR01336 Defective Image review from Image List skips.
– Enhancement: CR01370 Rotate Image tool parameters access.
– Fix: CR01390 Incorrect edge get graph.
– Enhnacement: CR01420 Increase Camera Link max. devices to 4.
– Fix: CR01429 Cannot assign Ellipse Fit center points.
– Fix: CR01414 Sentry 9000 freezes after stopping when “Stop on Fail” is enabled.
– Fix: CR01393 Inspection Recorder Default prompt button.
– Fix: CR01410 Area Limits Angle Default Value.
– Fix: CR01167 Camera type not detected.
– Fix: CR01423 Wrong image file name displayed in Camera window titlebar.
– Fix: CR01408 SVC Cameras reset when using Image Files.
– Fix: CR01430 Production token generation changes the reject id to lower case.
– Fix: CR01431 I/O settings changes are not saved.
– Fix: CR01432 I/O control tool is failing.
– Fix: CR01369 Diagnostic Menu lacks Result Window Search.
– Fix: CR01289 “Pause Display” does not seem to work for Virtual Camera inspections.
– Fix: CR01433 Graph displays random lines across button.

7.5.0 Build 16 SVM:
– Enhnacement: CR01420 Increase Camera Link max. devices to 4.
– Fix: CR01429 Cannot assign Ellipse Fit center points.
– Fix: CR01414 Sentry 9000 freezes after stopping when “Stop on Fail” is enabled.
– Fix: CR00907 Image Capture Out Of Boundary Condition.
– Fix: CR01393 Inspection Recorder Default prompt button.
– Fix: CR01410 Area Limits Angle Default Value.
– Fix: CR01167 Camera type not detected.
– Fix: CR01423 Wrong image file name displayed in Camera window titlebar.
– Fix: CR01408 SVC Cameras reset when using Image Files.
– Fix: CR01430 Production token generation changes the reject id to lower case.
– Fix: CR01431 I/O settings changes are not saved.
– Fix: CR01432 I/O control tool is failing.
– Fix: CR01369 Diagnostic Menu lacks Result Window Search.
– Fix: CR01289 “Pause Display” does not seem to work for Virtual Camera inspections.
– Fix: CR01437 Report generator tool does not use AM/PM indication to calculate shift.
– Enhancement: CR01441 Post/Reset Item enhancement.
– Fix: CR01444 Report Generator call Subroutine on shift change does not work.
– Add: CR01445 Search function for Area workspace.
– Add: CR01446 Search function for Data workspace.
– Enhancement: CR01459 Inspection Recorder deletes inspeciton sequence without warning.
– Add: CR01461 Ability to highlight area and/or data.
– Fix: CR01462 Edge get with intensity exclusion does not behave correctly.
– Fix: CR01453 “Demo License Expired” message should read “Developer”.
– Enhancement: CR01460 New inspection area should appear in center of view, not cam window.
– Fix: CR01450 Inspection Area stays highlighted.
– Fix: CR01464 Converting subroutine to library crashes Sentry 9000.
– Fix: CR01477 Calculator flow control does not behave properly for NOT function.
– Enhancement: CR01497 Defect count by lane.

+ Version 7.0 - Build 67

7.0.0 Beta Build 11:
– Add Reset RS232 Com Port calculator function.

7.0.0 Beta Build 12:
– Fix flip captured image option in Advanced camera dialog for generic camera.
– Fix OPC Client Write to device calculator function.

7.0.0 Beta Build 13:
– Add Reset Report Generator calculator function.

7.0.0 Beta Build 14:
– Add Transfer Hue, Transfer Saturation, and Transfer Intensity options in Image Capture tool for color camera.
– Fix color image whose intensity is modified by a tool to reflect the new intensity.
– Fix Reset Report Generator function in calculator tool if report generator is generating database token.
– Modify behavior of report generator difference to be increment.
– Fix crashing problem when expanding an area group by pressing +.

7.0.0 Beta Build 15:
– Add parameters for Transfer Hue in Image Capture tool for color camera.
– Fix Camera Link for not being closed if creating new inspection file.
– Add Camera Link Grab parameter logging.(Sentry9k.ini [CAMERA] LogCamera=1)
– Fix Frame Triggered Camera Link to be able free run.
– Fix Chart tool display.
– Fix Reset Graph Data to reset the results too.
– Report Generator will not generate database token after switching product.

7.0.0 Beta Build 16:
– Fix Edge Get using contrast or intensity differnce type will crash.
– Fix File Close (unmodified), followed by File New crashing.
– Fix Operator interface button display adjust are toolbox referencing incorrect area that is listed after a composite area.

7.0.0 Beta Build 17:
– Add ability to divide defect map into lanes and display a specific lane.
– Fix demo version Edit System inability to change IO type.

7.0.0 Beta Build 18:
– Fix button function “Display Operator Message List”
– Fix convert subroutine to library crashing.
– Add saving csv option for report generator tool.
– Fix Report Generator generating database token locking up inspection.
– Add User Defined type for Prompt Operator Message calculator function.

7.0.0 Beta Build 19:
– Add User Defined type for Asynchronous Prompt Operator Message calculator function.
– Add option for defect be expanded to the width of each lane it is present in.

7.0.0 Beta Build 20:
– Add auto add inspection data group folder members into report generator and graph.
– Increase defect map max lanes from 16 to 64.
– Fix Spurious edge filter memory leaks.
– Display Defect map lane label in the middle of the lane.
– Fix expanded defect size to lane width/

7.0.0 Beta Build 21:
– Fix turn operator interface with graph button on and off crashing.
– Fix File Save As application with graph button.
– Fix Inspection Task activated by Async Prompt OK/CANCEL misbehavior.
– Add Inspection Task activated by User Defined Async Prompt.
– Fix Limited Viewing Window.

7.0.0 Beta Build 22:
_ Fix add OPC Client item of type date crashes Sentry 9000
– Fix add OPC Client item memory leak.
– Add option to post process defect map report.
– Add ‘advanced’ clustering tool type to classify simple clustering result.

7.0.0 Beta Build 23:
– Fix OPC temporary key if used with system’s demo/temporary key.
– OPC Client usage requires OPC license.
– Report Generator to generate database token requires DAS license.
– Add calculator function “Is Application Launched?”
– Inspection stops in operator interface after mouse moved above a panel if tcp/ip is enabled.
– Add “Number of Camera Buffers” parameter for Camera Link.
– Fix retrieving reference tool data value for float result (index>=512) or integer parameter (index>=144).
– Fix Adv clustering, select tolerance for “Any Inspection Criteria”. If it fails then the clusters found do not have red bounding boxes or highlighting

7.0.0 Beta Build 24:
– Enhance fail status in result window
– Fix “Open Adjust Area Toolbox” button opening wrong area.
– Fix Calculator dialog with an operation referencing operator interface button with blank name.

7.0.0 Beta Build 25:
– Add permanent demo key
– Add significant digit to display for button displaying Op Msg List.
– Fix advanced clustering contrast criteria.
– Add calculator function Get Button Name

7.0.0 Beta Build 26:
– Add ability to retrieve data table, row, and column label name.
– Fix data table significant digit display.
– Fix Muliple Duplication of Mulltiple Referenced Areas
– Fix operator interface button “Enable/Disable Display Inspection Results”.
– Fix operator interface button “Shut Down Computer”
– Fix system set up password entry needs confirmation entry
– Fix simple clustering with cluster type dak and bright outside relative to background intensity using reference intensity.
– Fix simple clustering with cluster type dak and bright outside relative to background intensity found cluster when it should not.
– Fix Exit Interface button changed Status: Online button.
– Add paste special: paste without area.
– Increase math tool max variables from 16 to 256.
– Fix math tool exceptions: division by 0, modulus of 0.
– Fix defect map tool does not create rpt and xls when is there is no defect.
– Fix daisy chaining of advanced clustering crashing.
– Fix encoder frequency display.

7.0.0 Beta Build 27:
– Fix crashing caused by deleting operator interface panel that contains button displaying reference tool data.
– Add defect map report entries options.
– Fix Operator interface button with multiple states displaying wrong bitmap.
– Fix overrun defect map report numbering error.

7.0.0 Beta Build 28:
– Fix deleting defect map tool leaves orphan defect map window.
– Enhance loading image file to memory by specifying ImageFileBuffers.
– Fix crashing caused by changing Binning Mode through Image File Toolbox.
– Remove unused menu items.
– Enhance report generator tool to save to same file for 1 month, 1 year, or forever.
– Fix crashing if specifying report header in report generator tool, or using ‘%’ in the field header.
– Enhance defect map results access.
– Fix Defect Map tool Save As to non-existent folder failure.
– Add auto reconnect for OPC Client to OPC Server.
– Add Calculator function Is OPC Client Connected to OPC Server and Connect to OPC Server.
– Enhance record inspection to specify which inspection task to be recorded.
– Increase operator interface panels max from 64 to 96.
– Fix report generator with a lot of fields editing speed.

7.0.0 Beta Build 29:
– Fix Math tool If statement does not execute correctly
– Fix interrupt divide should be 1 (one) if window trigger position bit is of type input.
– Fix Save As inspection with a lot of operator interface panels to different folder is slow.
– Add a new function to delete all unused inspection areas.
– Add OI Button to enter operator interface need ability to create the new panel.
– Fix creating post item with new data defaulted to the post item’s name.
– Add a right-click function to colapse all tools, areas, or data
– Add button function to select from list of values.
– Increase OPC Client params max from 128 to 256.

7.0.0 Beta Build 30:
– Fix user defined asynchronous prompt task does not save button value.
– Fix Demo version shouldn’t assume ‘no’ in recovery, but wait for user.
– Add Ability to check if a tool is enabled/disabled.
– Fix importing library cause operator interface button lose reference to area and data.
– Add Math variable description
– Fix Color Match tolerances listed as targets.
– Fix Report Generator field always report 0

7.0.0 Beta Build 31:
– Fix Prompt Operator for Tool Data Input Value assigning string.
– Fix Copying string data value while specifying list of values crashes Sentry 9000.
– Fix Misspell worst with worse.
– Fix Default selection for inspection recorder.
– Fix References for category in discrete defect map are not saved.
– Fix No indication which tools are valid to be referenced by discrete defect map.
– Fix Discrete defect map report does not give correct data.
– Add Paste special using the same area.
– Add Disconnecting OPC Client from a Server will remove all items from the list.
– Fix Operator panel shown in engineering interface.
– Add Display camera image on operator interface button.
– Image pixel manipulation calculator function.
– Increase number of user timer from 4 to 16.
– Fix OPC Client auto reconnect message annoyance.
– Fix Image window displayed at wrong location
– Fix Defect Map reported incorrect percent good and percent defect.
– Fix Cut Field and Delete Field in report generator dialog disabled.
– Add Defect Map Report Total Defect Count.

7.0.0 Beta Build 32:
– Add Truncate Right and Retain Right calculator functions.
– Add ability to highlight tool.
– Fix Image Capture Out Of Bound Condition.
– Add Multi-monitors capability.
– Add Open toolbox from an operator interface button.
– Fix Defect map print out doesn’t match display.

7.0.0 Beta Build 33:
– Add Import/export data table from/to csv file.
– Fix Defect map catalog crashes Sentry 9000.
– Fix Disabled Image Capture tool will hung the system.
– Add System setup to have name option for copying inspection tools.
– Fix Advanced clustering contrast bin does not retain its values.
– Fix Closing debug window will generate error message when stopping inspection.
– Enhance Inspection Flow Toolbox change Freeze button to a check box.
– Add New tool: Pattern tool and Pattern matching tool.
– Fix Tool Pass? does not consider if referenced by flow control.
– Fix Going to engineering interface without entering password.
– Enhance Resize adjust tool data toolbox in operator interface.
– Fix “Apply” on a folder needs to execute all tools inside the folder.
– Add Option for not to display OPC Client reconnect message.

7.0.0 Beta Build 34:
– Fix Closing modified math tool dialog has no confirmation.
– Fix Normalization tool Locator Width/Height is inactive.
– Fix Normalization tool still using old area style.
– Add Ability to specify camera image type.
– Fix Button function “Display Reference Tool cumulative Average”.
– Fix crashing problem with area or data table using table template with 3 rows and 3 columns.
– Include virtual keyboard into the password dialog to increase data input reliability.
– Add close button and more space to inspection recorder dialog.
– Fix Defect map report misalignment.
– Fix Camera link calibrate page uses incorrect camera.
– Add Keyboard for saving inspection records.

7.0.0 Beta Build 35:
– Add Inspection areas need to have annotation.
– Fix Loading png image crashes Sentry 9000.
– Add Invert Image Mask action for Image Mask tool.
– Add Restore original image upon cancel.
– Add Noise reduction options increased from 10 to 64.
– Add Inspection recorder needs short description on the top of the dialog.
– Add Spatial filter tool needs a predefined sets of filters.
– Fix Undo function does not work on calculator.
– Add RSLinx Communication Active?
– Show Limited Viewing Window parameters always.
– Add Number of processors check.
– Add Histogram of intensity for simple clustering and clustering tools.
– Fix Execute Inspection with a specified starting Tool button locks up camera.

7.0.0 Beta Build 36:
– Fix OPC Client with auto-reconnect crash the system when closing the application.
– Add Discrete defect map is not listed in the View menu.
– Fix Inspection Area does not turn off after adjusement.
– Fix Cursor rotation of an area is ANNOYING AND IMPOSSIBLE.
– Fix Sentry9k does not remember last product run.
– Fix Product Select Button with default setting.
– Fix Adding New Library gives Error message.
– Fix Sentry 9000 crash after importing data to Inspection Data Table then Cancel.
– Fix Temporary key.

7.0.0 Beta Build 37:
– Add Calculator function Browse File.
– Fix Line check tool, filter page, terminology “furthest” should be “farthest”.
– Fix I/O tool does not specify what modules are group A, B, C, or D.
– Fix Record Inspection dialog inconsistent appearance.
– Fix Clustering MM Fill Ratio criteria cannot be selected.
– Fix Edge get using circular or radial direction does not detect any edge point.
– Add Export and Import Inspection Data Table calculator functions.
– Fix Calculator Function “Is Connected to OPC server?”
– Add OPC Client Disconnect from Server calculator function.
– Add OPC Server parameter name needs option to add parameter type or not.
– Fix Edge get graph crashes Sentry 9000.

7.0.0 Beta Build 38:
– Fix OPC Client List Diplays “Good” Data when not connected.
– Fix OPC Client page “Delete Server” function issue.
– Add Report Generator to create data token needs an automatic field setup.
– Add Report Generator frequency needs to be more explicit.

7.0.0 Beta Build 39:
– Fix Inspection Data Table crashes Sentry 9000.
– Fix Display Inspection Data button slows down Sentry 9000.
– Fix Temporary key may expire when the clock changing at midnight.
– Add Inspection time result for Inspection Task.
– Fix OPC Client reference adjustment.
– Add Math tool needs pass fail result.
– Increase Image dimension limits.
– Add OPC Client needs to have option to create a log for its activities.
– Add SVC 502 camera support.
– Enhance Column and Row Headers need to be locked in Data and Area Table.

7.0.0 Build 40:
– Fix Math tool always failing.
– Fix OPC Client is connected? may cause Sentry 9000 to crash.
– Enhance Image dimension max increased to 144K.
– Fix Auto-exposure area will lock up system.
– Add histogram as one of Chart type.
– Fix Graph scaling function on Axes page does not work.
– Fix Find Text in tool is incomplete.
– Fix Remove camera type SVS_502E color camera.
– Add run inspection and run operator interface toolbars.
– Fix Inspection area rotation without keyboard.
– Fix Debug break point condition cannot be assigned.
– Fix Tool displayed as failing tool in Tool Summary and Inspection Flow toolbox.
– Fix Simple clustering allocation failure.
– Enhance Wider Trigger Position and Strobe Position drop down boxes.
– Enhance Rearrange I/O comment.
– Add Flow control based on global pass/fail.
– Fix Zoom position is not saved.
– Add Ability to specify operator interface refresh rate.

7.0.0 Build 41:
– Fix Cannot open Distance Measurement dialog.
– Enhance Data table rows and colums max increased to 2048.
– Fix Simple clustering with merging requires large memory.
– Enhance Load Image File rotate option. Document version increased to 707.
– Fix Copy Chart will not keep the reference data into the copied chart.
– Fix Add row and column in Data and Area Table needs to move to the next row.
– Fix Surface Normalization is broken when using new area style.
– Fix Default values for some of calculator functions.
– Enhance File New dialog.
– Add Calculator save screen capture function.
– Fix Defect Map stops inspection.
– Fix New virtual keyboard entry for password does not recognize the virtual “enter”.
– Add Chart Histogram results need to be accessible.
– Enhance Chart Histogram maximum groups need to be increased (32->48).
– Enhance Report generator fields limit needs to be increased (255->320).
– Fix Calculator does not duplicate color images to generic or other color image window.
– Fix Color image file buffering crashes Sentry 9000.
– Fix Defect map color image tool tip doesn’t display correctly.
– Fix Discrete defect map doesn’t save PNG format.
– Fix Operator Interface button will not display data table value.
– Fix Color camera rgb gain is defined only by device.

7.0.0 Build 42:
– Fix Generic camera as the first camera crashes Sentry 9000.
– Fix Operator interface button password protection is not retained.
– Fix Edge get graph does not show the threshold line.
– Add Ability to setup OPC Client items offline.
– Fix Color match tool result is incorrect.
– Add Generic color camera.
– Fix Table template column header spelling is incorrect.
– Add Color camera image capture parameters.
– Add Duplicate image mask calculator function.
– Fix Get status of OPC Server crashed the system.

7.0.0 Build 43:
– Fix Calculator referencing OPC Client Local Data is not saved.
– Enhancement: OPC Client on separate thread.
– Fix Create Area based on clusters crashed Sentry 9000.
– Fix Defect map catalog crashes Sentry 9000.
– Fix Numerical error on the defect map report after splicing.
– Fix Cutting a portion of defect map crashes Sentry 9000.
– Fix Adv clustering merge error.
– Fix Chart tool crashes Sentry 9000.
– Fix Advanced Clustering criteria text boxes are not long enough.
– Fix Math Tool If statement does not execute correctly.
– Fix Editing Inspection Interface Remote Control button crashes Sentry 9000.
– Fix Collapse all function does not collapse folder inside another folder.
– Fix Report Generator Field labels moves out of view.
– Fix Report Generator Tool “Apply” Button does not create Token/RPT file.
– Fix Operator Interface button flickers.
– Enhancement: Display image on a button including inspection activities.
– Fix System Crashed when Close Application after Changes in Data.
– Add subpixelization term to the enhance edge smoothness option.
– Rename Random Noise Filter to Image Morphology.
– Fix Histogram old style area does not have apply button.
– Fix Contour Learn with contour smoothness level 0 crashed the system.
– Add Ability to trigger through OPC.

7.0.0 Build 44:
– Fix: Cut/paste images from cam0 to cam1 consistently crashes the S9K.
– Enhancement: Conditional dual processor prompt needed.
– Fix: Tool Summary does not save the list when application is closed.
– Fix: Verify Library function will change calculator reference to operator panel.
– Add: Display histogram of intensity distribution.
– Enhancement: Data Table memory allocation.
– Fix: Calculator OPC Client operation to a disconnected server crashes Sentry 9000.
– Fix: Image Morphology (Random noise filter) using old area.
– Fix: Camera Trigger Position is always shown as None.
– Fix: Connecting to invalid OPC Server locks up Sentry 9000.
– Fix: Free running Camera Link with 0 exposure time crashes Sentry 9000.

7.0.0 Build 45:
– Fix: Subroutine string parameter missing last character.
– Enhancement: Increase the number of operator buttons to 96.
– Enhancement: Ability to snap to grid for the operator interface.
– Add: Defect Map Web Wander.
– Fix: Tool bar does not show correctly in 800 x 600 screen resolution.
– Add: Report Header needs ability to reference.
– Fix: Report generator creates double entries when it is set to time based.
– Fix: Report generator removed reset source option on the advanced page.
– Enhancement: Report generator needs to show directory of separate shift reports.
– Fix: OPC Client Retrieve from Device doesn’t update local data.
– Fix: Ref. Camera Marker Position became zero in Inspection Task tool.
– Fix: Sentry SVM V7.5, saving after importing Library Bug.
– Fix: Saving clustering tool with invalid old style area locator will corrupt s9k file.
– Fix: Pareto chart auto add data items.
– Fix: Inspection Task activated by OPC Client Text Message.
– Fix: Color Match tool identify wrong color.
– Fix: Edit System Setup an Application with OPC offline will crash the system.
– Fix: Edge Get Graph is not correct when using noise and fuzziness reduction.
– Fix: Saving image as PNG is slow.
– Fix: Display Inspection Area Tables.
– Fix: OPC Client value of number has space at the end.
– Fix: Duplicate image mask to/from invalid camera crashes Sentry 9000.
– Enhancement: Post Item tool ability to set output bits on multiple I/O boards.
– Fix: Loop count doesn’t start from starting value (first index).
– Fix: Remote Tool Transfer cannot send color image.

7.0.0 Build 46:
– Fix: Distance Measurement reference which data.
– Add: Operator message length.
– Fix: Rotate Color Image doesn’t transfer Hue and Saturation values.
– Enhancement: Color Match tool enhancements.
– Fix: Color Match tool Target and Tolerance values retrieval return 0.
– Fix: Blank OPC Client Server ID crashes Sentry 9000.
– Enhancement: Reduce waiting time for operator interface related calculator functions.

7.0.0 Build 47:
– Add: Button function to open I/O Activity.
– Fix: OPC Client Add Item button disabled.
– Fix: OPC Client WTclient.dll demo version.
– Fix: Retrieve Inspection Data does not work.
– Fix: Export Inspection Data Table doesn’t work.
– Fix: Simple clustering with multiple areas and without merging doesn’t work.
– Enhancement: Select all image file names.
– Fix: Duplicate Image Mask between color and grey scale camera.
– Fix: Pause image display on fail still refreshing inspection activities.

7.0.0 Build 48:
– Enhancement: Ignore masked region in histogram tool.
– Fix: Camera Link advanced parameters.
– Fix: Sync count displayed incorrect.
– Enhancement: Image file dialog default option.
– Fix: Sentry 9000 crashes when converting subroutine to library.
– Enhancement: Image morphology tool is slow.
– Fix: Enable/Disable Interface Panel button function.
– Add: Saving and reviewing image.
– Fix: Apply button does not work on a disabled calculator.
– Fix: Data Item created Post Item but no name.
– Add: Place Holder buttons.
– Add: Circle Wrap tool.
– Add: Reset Camera calculator function.

7.0.0 Build 49:
– Fix: Changing operator interface button from displaying chart value to chart label crashes Sentry 9000.
– Fix: Button on Free Style operator interface panel disappear.
– Enhancement: Multi-level place holder operator interface.

7.0.0 Build 50:
– Fix: Misspelling in Image Enhance dialog.
– Fix: Exposure Delay is shown.
– Fix: Flip Captured Image option is not shown.
– Enhancement: Hide non-place holder panels while in place holder mode.
– Fix: Out of range valid intensity.
– Fix: Buttons undeleting themselves.

7.0.0 Build 51:
– Fix: OPC server settings are not saved.
– Fix: Editing data item with invalid camera crashes Sentry 9000.
– Fix: Deleting operator interface panel crashes Sentry 9000.
– Fix: Cancelling Edit All Panels crashes Sentry 9000.
– Enhancement: OPC Client local data in WindowsXP SP3 is not refreshed.
– Enhancement: Remote Tool Transfer sending timeout.

7.0.0 Build 52:
– Add: OPC Client Activity.
– Add: Independentl IO Delay Setting for Individual Virtual Camera.

7.0.0 Build 53:
– Fix: Calculator Divide function, division by zero result.
– Fix: Rename I/O Delay to Number of Output Shift Register.
– Fix: OPC Client Delete Item crashes Sentry 9000.
– Fix: Report Generator call Subroutine on shift change does not work.
– Fix: Fix crashing during Sentry 9000 reboot.
– Fix: OPC Client Write to Device with Result Window and moving OPC Client Activity cause Sentry 9000 to stop responding.
– Add: Calculator ‘Difference’ function.
– Enhnacement: Help About Sentry 9000… halts inspection.
– Mod: Report Generator generating production token: skip first 2 from skip 1.
downtime token: no skipping from skip 1.

7.0.0 Build 54:
– Fix: Report generator generates token on closeout.
– Enhancement: Defect Map enhancements.
– Fix: Circular Warp destination camera activities retained.
– Fix: Circular Warp for color camera.
– Fix: Circular Warp destination dimension less than needed.
– Add: OPC Client Server Last Update Time.
– Add: Calculator Time Difference function.

7.0.0 Build 55:
– Fix: Tool search for circular warp tool is missing.
– Fix: Circular warp tool dialog title is circular wrap.
– Fix: Circular Edge Linearization tool.
– Enhancement: OPC Client Local Data update.
– Enhancement: OPC Client Local Data Update Rate.

7.0.0 Build 56:
– Enhancement: Camera Link com port setting.
– Enahncement: Defect Map Catalog problems.
– Fix: Area inside Area Table with reference position does not update.
– Enhancement: The image list length is limited to 10 images.
– Fix: Camera Strobe Position is always shown as None.
– Enhancement: Operator Interface calculator functions slow down inspection.

7.0.0 Build 57:
– Fix: Contour Learn with contour smoothness level 0 crashed the system.
– Add: Image Re-size tool.
– Fix: Rotate Image tool crashes Sentry 9000.
– Fix: Editing calculator cause Sentry 9000 to hang.

7.0.0 Build 58:
– Add: Enable/Disable Auto-save.

7.0.0 Build 59:
– Enhancement: Auto-save indication.
– Enhancement: Choosing Use Saved Images should automatically display the Use Image Toolbox.
– Fix: Copy and paste inspection data table.
– Enhancement: Changing list results of clustering to criteria results.
– Fix: Show Defect Map button does not bring up the defect map on the operator interface.
– Fix: Display Button of Camera Image does not work on generic camera.
– Fix: Cannot set an output bit.
– Fix: 1 tap line scan camera.
– Enhancement: Sync Triggered indication.
– Fix: Error creating a library with data folder inside library folder.

7.0.0 Build 60:
– Add: Circular Arc Inspection Area.
– Add: Button function to OpInterface for “View OPC Client Activity”.
– Fix: Report Generator not able to extract string name from Data Table.
– Add: Pareto Chart needs ability to display limited number of data.
– Fix: Read Field from Text File always return blanks.
– Add: Circular Arc Region Inspection Area.
– Add: Service task called at the completion of camera device triggered task.
– Add: Access to graph fail and warning limits.
– Add: Repeating discrete defect map detection.
– Enhancement: Relative Calibration Reference.
– Add: Asynchronous Receive through RSLinx.
– Fix: Add or Edit Operator Dialog allows user to see others’ passwords.
– Fix: Operator list without an operator with level 0 password is allowed.
– Fix: Entering Engineering Interface with invalid password level.
– Fix: Spurious Edge Filter default values.
– Enhancement: Operator button functions that assign value needs password option.
– Enhancement: Need ability to login and logout in the operator interface.
– Enhancement: Reject List Issues.
– Fix: Zoom panel (image place holder panel) issues.

7.0.0 Build 61:
– Fix: No Inspection Flow toolbox.
– Fix: Distance measurement from/to inspection area.
– Fix: No Warning Message for Invalid Level Number in OI Button.
– Fix: Change Password in OI Need to Clear the Second Time.
– Fix: Multiple Change Password Box Hung.
– Fix: Going offline in system with frame triggered Camera Link camera takes long time.
– Enhancement: Built-in default button bitmap.
– Fix: Cannot specify list of values for Assign Tool Data button.

7.0.0 Build 62:
– Add: Goto Operator Interface Panel button function.
– Add: (Elliptical) Arc Region Inspection Area.
– Add: Discrete Defect Map ability to exclude category from defective units calculation.
– Enhancement: Option to disable OPC Client Local Data Update Rate.
– Enhancement: Data Item needs to have occurrence counts.
– Enhancement: Discrete Defect Map needs to have occurrence count for each category.
– Enhancement: Token generation from Report Generator need to be simpler.
– Enhancement: Default Values for Simple Clustering.
– Enhancement: Reject List Enhancement.
– Fix: Snap-to-grid issues.
– Fix: Out of Memory Error.
– Fix: Ellipse Fit Bug.
– Fix: Add new tool while editing another tool causes crash.
– Fix: “Zoom In/Out” buttons should be grayed out while the inspection is running.
– Fix: Remote Diagnostics Problem.
– Fix: Ungrouping a composite area crashes Sentry 9000.
– Fix: Grouping areas crashes Sentry 9000.
– Fix: Inspection Area Edit dialog annoyance.
– Fix: Discrete Defect Map XLS report.
– Fix: Discrete defect map zoom functions are backward.
– Enhancement: Sentry 9000 interaction with SentryPoint.

7.0.0 Build 63:
– Fix: CR01291 Locate Extremum Edge Point tool lacking.
– Fix: CR01293 Discrete defect map doesn’t draw defects.
– Fix: CR01298 Clicking on password protected button does not execute the button function.
– Fix: CR01302 Previous operator name is retained.
– Fix: CR01303 Deleted camera name is still displayed.
– Fix: CR01305 Adding Button for “Zoom” option does not work properly.
– Fix: CR01311 Memory leaks.
– Fix: CR01312 Keep increasing memory usage.
– Fix: CR01314 Report Generator – While adding new Fields, the Field Header Value Remains the Same.
– Enhancement: CR01292 Report Generator Database Token Location.
– Enhancement: CR01294 Ability to specify camera sequence.

7.0.0 Build 64:
– Enhancement: CR01313 Simple Clustering “Ignore clusters…” default values do not make sense.
– Enhancement: CR01315 Limited Range of Adjustment for Areas and Input Dialogs.
– Enahncement: CR01316 Inspection Recorder enhancements.
– Fix: CR01317 Misspelling Draw Arc Region bubble help.
– Fix: CR01318 Need more information to be displayed on Arc area editing.
– Fix: CR01329 Button displaying remote operator panels causes panel to disappear.
– Fix: cr01330 Spatial Filter Graphics Refresh Bug.

7.0.0 Build 65:
– Enhancement: CR01332 Ability to open multiple Sentry 9000 developer version at the same time.
– Fix: CR01338 Simple Clustering’s mask small clusters option crashes Sentry 9000.
– Fix: CR01320 Include Operator Panels does not work correctly when saving library.
– Fix: CR01321 Adjust Area dialog is grayed out.
– Fix: CR01334 No option to “Paste Below” when copying Inspection Task or Subroutine.
– Fix: CR01339 Fail to add inspection library.
– Fix: CR01340 Fail to create new inspection from template.
– Fix: CR01342 Reviewing image file using Image File Toolbox causes sentry 9000 to crash.
– Fix: CR01325 Default Display Update needs to be 300 ms.
– Fix: CR01333 Sentry 9000 crashes when clicking “X” on Tool Workspace.
– Fix: CR01343 Saving inspection with many operator interface panels is slow.
– Fix: CR01327 Display Image File Toolbox inconsistency.
– Fix: CR01341 Image File Toolbox needs bubble text.

7.0.0 Build 66:
– Fix: CR01348 Garbled text in Results window for “Annotate Defect Map” function.
– Fix: CR01349 Limited Range Line-Area Bugs.
– Fix: CR01350 Limited Range Rectangle-Area crashes system.
– Fix: CR01355 Odd behavior when editing tool properties of Defect Map.
– Fix: CR01356 Add “Limit…” to the right-click menu on area workspace.
– Enhancement: CR011358 Simple Clustering parameter access.
– Fix: CR01359 Diagnostic menu Inconsistent Name.
– Fix: CR01360 Circular warp parameters need to have units.
– Enhancement: CR01361 Circular warp overlap unit is better in degree instead of pixels.
– Enhancement: CR01364 Data Item page: multiple boards will be better if displayed in multiple tabs.
– Enhancement: CR01344 Advanced Clustering Tolerance Page Annoyance.
– Fix: CR01366 Inspection Recorder destination.
– Enhancement: CR01365 Occurrence count not on Data Item Dialog.
– Fix: CR01336 Defective Image review from Image List skips.
– Enhancement: CR01370 Rotate Image tool parameters access.
– Fix: CR01390 Incorrect edge get graph.
– Enhancement: CR01409 Version 7 license based on permanent MAC address.
– Fix: CR01433 Graph displays random lines across button.

7.0.0 Build 67:
– Enhnacement: CR01420 Increase Camera Link max. devices to 4.
– Fix: CR01429 Cannot assign Ellipse Fit center points.
– Fix: CR01414 Sentry 9000 freezes after stopping when “Stop on Fail” is enabled.
– Fix: CR00907 Image Capture Out Of Boundary Condition.
– Fix: CR01393 Inspection Recorder Default prompt button.
– Fix: CR01410 Area Limits Angle Default Value.
– Fix: CR01423 Wrong image file name displayed in Camera window titlebar.
– Fix: CR01430 Production token generation changes the reject id to lower case.
– Fix: CR01431 I/O settings changes are not saved.
– Fix: CR01432 I/O control tool is failing.
– Fix: CR01369 Diagnostic Menu lacks Result Window Search.
– Fix: CR01289 “Pause Display” does not seem to work for Virtual Camera inspections.
– Fix: CR01437 Report generator tool does not use AM/PM indication to calculate shift.
– Enhancement: CR01441 Post/Reset Item enhancement.
– Fix: CR01444 Report Generator call Subroutine on shift change does not work.
– Add: CR01445 Search function for Area workspace.
– Add: CR01446 Search function for Data workspace.
– Enhancement: CR01459 Inspection Recorder deletes inspeciton sequence without warning.
– Add: CR01461 Ability to highlight area and/or data.
– Fix: CR01462 Edge get with intensity exclusion does not behave correctly.
– Fix: CR01453 “Demo License Expired” message should read “Developer”.
– Enhancement: CR01460 New inspection area should appear in center of view, not cam window.
– Fix: CR01450 Inspection Area stays highlighted.
– Fix: CR01464 Converting subroutine to library crashes Sentry 9000.
– Fix: CR01477 Calculator flow control does not behave properly for NOT function.
– Enhancement: CR01497 Defect count by lane.

+ Version 6.0 - Build 15

6.0.3 Build 14:
– Fix: CR00515 Sentry 9000 crash after several times changing the average intensity in the inspection criteria of the advanced clustering tool.
– Fix: CR00542 Sentry 9000 crash because the “Open Existing Application” selection in the File New Dialog. It needs to delay opening of existing application until the end of the file new process.
– Fix: CR00585 Sentry 9000 when trying to add an inspection item tool in the data workspace
– Fix: CR00607 Sentry 9000 crash when delete a camera through system setup
– Fix: CR00608 Column name (column header) in the Data Table Group is not in the right iteration.
– Fix: CR00609 Edit Advanced Camera setup, show the “Digitizer Configuraton” instead of “Digitizer Configuration”
– Fix: CR00618 Flip option in the “Rotate Image” tool does not flip the image correctly when the angle is 0.
– Fix: CR00623 List of items in the Chart tool cannot display the whole name after more than 10 items.
– Fix: CR00624 Percentage on the chart or graph does not follow the display resolution (always integer).
– Fix: CR00638 Spot Check tool does not save the allowable deviation values when the dialog is closed.
– Fix: CR00643 Calculator refereces to Data Table Group is not updated when any rows or columns are deleted in the Data Table Group.
– Fix: CR00644 Calculator function “Assign Inspection Data Table” and “Assign Inspection Area Table” second operand reference is not updated.
– Fix: CR00655 An image window is disabled when file saved. Re-open the file enable the image capture or its group.
– Fix: CR00662 Inspection Data Table Group has some bugs in the row operation, especially adding new row.
– Fix: CR00665 Switch to another tab command does not need the word “try” to make it a proper English.
– Fix: CR00677 Two operator interface “Assign tool data based on a list of values” buttons pointing to the same tool are disconnected.
– Fix: CR00678 Strobe position was moved from Interupt I/O definition to the Camera Definition.
– Fix: CR00680 Area referencing other areas does not stay after importing an Inspection Library.
– Fix: CR00682 Converting an Inspection Library into a Subroutine still links to the Area and Data Folder.
– Fix: CR00683 Exporting a subroutine into an Inspection Library does not have option which operator interface to be included.
– Fix: CR00686 Changing calibrated pixel scale in the Edit System Setup does not change the defect map results.
– Enhancement: CR00612 The clustering tool with type “Relative to background intensity” have the ability for the user to exclude intensity for the background calculation. The exclusion values can also be asigned from calculator for dynamic background intensity calculation.
– Enhancement: CR00614 Rotate Image Tool has more post processing options:
a.Flip the rotated image horizontally, vertically, or both directions
b.Add background image of the second area
c.Multiply rotated image by a constant
d.Offset rotate image
e.Invert rotated image
f.Clip the result intensity below certain intensity and/or above another intensity
Additionally, the result (rotated image) can be placed in the same camera window as the original image.
– Enhancement: CR00628 Local name or label for cameras customizable by users. The default name is still cam0, cam1, etc.
– Enhancement: CR00625 Local name for I/O Control Bit. Users have the ability to create labels for every bit in the setup I/O page so that it will be easier to debug or to maintain.
– Enhancement: CR00626 There will be warning if the output signal duration is greater than the maximum cycle time.
– Enhancement: CR00639 Defect Map tool has more options for the size of saved image: 100×100, 200×200, 300×300, 400×400, 500×500, 1Kx1K, full image
– Enhancement: CR00640 Defect Catalog images has lines to show where the defect position is so that the user can easily locate the defect
– Enhancement: CR00641 Calculator has access to the number of tables, number of rows, and number of columns of a Data Table Group. Calculator can also assign the current selected table, row, and column independently.
– Enhancement: CR00644 New function in calculator: “Open text file for reading” and “Read text file”.
– Enhancement: CR00645 Users have access to defect map summary entries. This intended for flexibility by providing ability to generate summary manually through the use of report generator tool.
– Enhancement: CR00647 New function in calculator to read from the user INI file. Users need to specify the INI file name and the INI file section and/or the INI file entry.
– Enhancement: CR00648 Report generator has more options for the report type: RPT, XLS, or both types.
– Enhancement: CR00651 Data Table Group and Area Table Group have the ability to be referenced by their column dinamically.
– Enhancement: CR00679 New Calculator function to access the pass/fail condition of a certain tool.
– Enhancement: CR00684 Defect Map saving has more options to save the defect map, save the RPT report, and save the XLS report.

6.0.3 Build 15:
– Fix: CR578 Dissasosiate Defect Map tool name from Defect Map Title
– Fix: CR662 Problems with row operations in Data Table
– Fix: CR681 Library with areas reference areas lost all the references
– Fix: CR686 Changing calibration pixel scales does not change the Defect Map results
– Fix: CR687 I/O page does not have I/O position number
– Fix: CR688 Multiple intensity bins doesn’t work properly
– Fix: CR690 Changing product in an application with Defect Maps crashes
– Fix: CR692 Changing product to a more than 8 products crashes
– Fix: CR701 New calculator doesn’t default at the selected tool name
– Fix: CR702 Sentry 9000 doesn’t keep the latest engineering interface window position
– Fix: CR705 Exposure mode and video mode combo box crashes the system
– Fix: CR706 Defect Map has artificial extra cycle at the beginning of inspection
– Fix: CR707 Saving Defect Map with offset leader crashes the system
– Enhancement: CR625 Local name for each I/O control bit
– Enhancement: CR684 More saving options for Defect Map Tool
– Enhancement: CR648 Report Generator can generate Excel report
– Enhancement: CR669 Edge Get graph default position is based on the Edge Detection method
– Enhancement: CR679 Pass fail condition of an individual tool can be accessed from Calculator Tool
– Enhancement: CR689 Camera calibration page is not shown in the demo version
– Enhancement: CR691 Total number of fields in the Report Generator Tool has been increased from 12 fields to 32 fields
– Enhancement: CR693 Advanced Clustering criterias has been re-group to make it easier to understand
– Enhancement: CR694 New calculation options for fill ratio in Advanced Clustering Tool
– Enhancement: CR699 New parameter “Offset leader” has been added to Defect Map Tool

top